Davis Instruments 8246, 8241, 8245, 8226, 8211, 8220, 8221 Trip Log Table View, Unzoom Copy As Save As

Welcome to CarChip

Right-Click Menu Commands:

The Right-Click Menu commands are available in the Trip Log Plot view:

•Unzoom

•Copy As

•Save As

•Speed Bands - Select to include horizontal lines indicating speed band settings.

•Braking Events - Select to draw vertical lines indicating braking events that exceed a braking threshold.

•Acceleration Events - Select to include vertical lines indicating acceleration events that exceed an acceleration threshold.

•Line Plot - Select to draw plots using plain lines. If not selected the area under the lines is filled in with black.

•Plot Coordinates - Select to display the cursor coordinates inside the plot view window.

•Normalize Axes - Select to use the same upper speed range for all Speed Plots. The upper end of the speed range is set in the Setup / Plots dialog box. Click the Options button in the plot window to change the upper speed range.

•Help F1

Trip Log Table View

The Trip Log Table view displays the all the values, including vehicle speed and any other selected parameters, that were sampled by the CarChip data logger through the duration of the trip.

Note: The trip data that displays in the table view depends on CarChip data logger model. The basic CarChip displays only the vehicle speed in the table view. The CarChip E/X or higher model displays the data for any additional parameters that have been selected.

To view the Trip Log Table:

Click the Trip Log View icon or Select Trip Log from the View menu. The Trip Log Summary view displays.

1.Click on the Trip Log drop-down box to display a list of all trips recorded in the Trip Log. The drop- down list box always begins with the Summary view, with each recorded trip listed in order below the Summary.

61