CarChip Online Help Printable Version
2.Check the box next to each plot option to turn it on. A checked box indicates the option is turned on.
•Draw Speed Bands - Displays your selected speed band settings in the plot.
•Draw Braking Events - Marks braking events that exceed your preset braking thresholds.
•Draw Acceleration Events - Displays acceleration events that exceed your preset acceleration thresholds.
•Draw Plots using Lines Rather than Areas - Displays a line graph of the measured data. Turning this option off turns the area under the measured data black in the plot.
•Draw Plot Coordinates Only When Ctrl Key is Pressed - Display the cursor's plot coordinates only when the Control key is pressed. The plot coordinates are the elapsed time of the trip and the data value associated with that time. If not checked, the cursor's coordinates on the plot are displayed continuously when the cursor is within the plot area.
•Normalize vertical axes to ___ MPH / KPH - Set the upper limit of the vehicle speed plot to the speed of your choice. You can change the speed used to normalize the axes by highlighting the current speed setting with your cursor and then entering the new speed. If not checked, the upper limit of the vertical axes will be the maximum speed achieved by the vehicle during the current trip.
3.Click OK to save the new plot options. Click Cancel to exit the dialog box and retain the previous plot options.
See Also:
Draw Speed Bands
Draw Braking Events
Draw Acceleration Events
Draw Plots Using Lines
Draw Plot Coordinates
Normalize Vertical Axis
Draw Speed Bands
The Draw Speed Bands check box in the Setup / Plots dialog box displays the speed limitations set in Set Speed Bands dialog box in the plots displayed in the Trip Log Plot view.
By selecting this option in the Setup/Plots dialog box, the speed bands are drawn in the plot. These speed bands are represented in the plot by horizontal dotted lines. The two intermediate speed bands are black dotted lines. The maximum speed band is a red dotted line.
To display speed bands in the plots:
1.Select Plots from the Setup menu. The Setup / Plots dialog box displays.
26