ARM ARM DUI 0137A manual Cancel, No pc write access message

Page 23

Connecting to RMHost

Note

If RMHost detects an error in the configuration you have selected, an error message is displayed. If this happens, you can click one of the following:

OK

Stores the configuration, although the error can prevent you from using

 

RMHost.

Cancel

Does not store the configuration, and you are returned to the

 

RealMonitor Configuration dialog box.

See Error messages on page 37 for a description of RMHost-related errors.

If configuration is successful, the selected configuration is stored, and the Choose

Target dialog box is displayed.

10.Click OK. You are ready to begin debugging your application (see Chapter 3 Debugging with RMHost).

Note

A dialog box indicating that the processor is still executing might be displayed. If this happens, click No to indicate that you do not want execution to stop.

Caution

When switching targets using AXD, a dialog box is displayed that requests whether you want to reload the last image. In this case, you must click No because reloading the last image corrupts the currently running image.

If you have disabled write access to the program counter (pc) in the register descriptor block, the message shown in Figure 2-6is displayed (see CPU register access on page 34).

Figure 2-6 No pc write access message

If you have disabled read access to the pc in the register descriptor block, the message shown in Figure 2-7 on page 210 is displayed (see CPU register access on page 34).

ARM DUI 0137A

Copyright © 2000 ARM Limited. All rights reserved.. All rights reserved.

29

Image 23
Contents ARM RMHost User Guide ARM RMHostChapter Debugging with RMHost User GuideContents About this book on PrefaceTypographical conventions Using this bookAbout this book Intended audienceARM publications Further readingOther publications Feedback on this book FeedbackFeedback on RMHost ARM DUI 0137A About RMHost on RMHost requirements on Overview of RMHostApplication/RTOS About RMHostOverview of RMHost RMHost package RMHost requirementsConnecting to RMHost Procedure for connecting to RMHost using AXD Debuggers chapter of the Multi-ICE User Guide Configure interface dialog box Select Configure Interface from the Options menuDescribes how to do this RealMonitor Configuration dialog box Jtag controller search dialog box Deselect the the option Fetch module information from target No pc write access message CancelNo pc read access message Lines 2 AXD connection messages212 Debugging with RMHost Nonstop debug Debugging with RMHostBackground memory access Nonstop startup CPU register accessSemihosting ProfilingData messaging Debugging with RMHost RDI Error messagesTarget does not include an ARM processor Memory map forbids reading from location RMHost could not load the specified Jtag controller Yes Other messages from RMHost312 Asic Using RMHost with Trace Debug ToolsSelect Debugger Internals from the System Views menu Configuring AXD to enable tracing with RMHostPerformance of RMHost with TDT Rmoptsdminfo IndexRmoptdatalogging Rmoptgetpc