![](/images/new-backgrounds/1240557/24055771x1.webp)
ACCESSORIES
SECTION 5: ACCESSORIES
G1194—3-Jaw Chuck
A "must have" for the serious wood turner. This
H9586—Lathe Fundamentals
With more than 300 color photos, this fourth authoritative Popular Mechanics Workshop tool book helps woodworkers take full advantage of this most essential piece of equipment. No guide will give them a better start. 192 pages.
Figure 48. Model G1194 3-Jaw Chuck.
G1082—4-Jaw Chuck
Another "must have" for the serious wood turner. This
Figure 50. Model H9586 Lathe Fundamentals
guide book.
H5954—Robert Sorby Stebcentre MT#2 Razor sharp teeth bite into the workpiece for secure operation and the spring loaded center point controls the amount of drive or slip. This pat- ented feature helps avoid the problem of ‘dig-in’. Production turners can also load and unload their work while the lathe is still running!
Figure 49. Model G1082 | Figure 51. Robert Sorby Stebcentre. |
G3167—11⁄4" x 8 TPI RH Threaded Insert
This threaded insert is required to mount a 3- or
G0632 16" x 42" Variable Speed Wood Lathe |