![](/images/new-backgrounds/1240557/24055741x1.webp)
Operations
SECTION 4: OPERATIONS
Operation Safety |
| Adjusting Headstock |
|
|
|
|
|
|
Damage to your eyes and lungs could result from using this machine without proper pro- tective gear. Always wear safety glasses and a respirator when operating this machine.
Loose hair and clothing
could get caught in the
lathe and cause serious
personal injury. Keep
loose clothing and long
hair away from moving parts of lathe.
NOTICE
If you have never used a wood lathe before, WE STRONGLY RECOMMEND that you read books, trade magazines, or get for- mal training before beginning any projects. Regardless of the content in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.
The Model G0632 headstock can be positioned anywhere along the lathe bed and swiveled 360°.
To position the headstock along the length of the lathe bed:
1.DISCONNECT THE LATHE FROM THE POWER SOURCE!
2.Loosen the headstock lock handle (see Figure 17).
Figure 17. Headstock lock handle.
3.Slide the headstock to the desired location on the bed and use the headstock lock handle to secure the headstock in position.
Note: The large clamping hex nut under- neath the headstock will require occasional adjusting to ensure proper clamping pressure of the headstock to the bed. Turn this hex nut in small increments to fine tune the clamping pressure as needed.
G0632 16" x 42" Variable Speed Wood Lathe |