Grizzly G0632 owner manual Inventory Figures Qty

Inventory

Inventory

After all the parts have been removed from the shipping containers, you should have the follow- ing items:

Inventory: (Figures 5–7)		Qty
A.	Lathe Assembly
	—Headstock (mounted)	1
	—Tool Rest Base (mounted)	1
	—Tailstock (mounted)	1
	—Face Plate 6" (installed)	1
B.	Supporting Legs	2
C.	Machine Feet	4
D.	Tool Rest	1
E.	Spur Center MT#2	1
F.	Live Center MT#2	1
G.	Hex Wrenches 3, 4, 8mm	1 Ea
H.	Knockout Tool	1
I.	Indexing Pin	1
J.	Hardware (not shown)
	—Cap Screws M10-1.5 x 25	8
	—Lock Washers 10mm	8

A

Figure 5. Model G0632 inventory A.

G0632 16" x 42" Variable Speed Wood Lathe

B

Figure 6. Model G0632 inventory B.

E

F

D

C

G

HI

Figure 7. Model G0632 inventory C–I.

If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

NOTICE

Some hardware/fasteners on the inventory list may arrive pre-installed. Check mount- ing locations before assuming that any items from the inventory list are missing.

-13-