Clean Up
Clean Up
The unpainted surfaces are coated with a waxy oil to prevent corrosion during shipment. Remove this protective coating with a solvent cleaner or
Gasoline and petroleum products have low flash points and can explode or cause fire if used to clean machinery. DO NOT use these products to clean the machinery.
Many cleaning solvents are toxic if inhaled. Minimize your risk by only using these products in a well ventilated area.
This natural,
Figure 10. Grizzly citrus degreaser.
Assembly
To assemble your lathe:
1.Stand the right and left supporting legs up approximately 47" apart, and get them rea- sonably aligned, as shown in Figure 11.
Figure 11. Stand legs approximately 47" apart to
prepare for mounting the lathe.
The G0632 and its com- ponents are very heavy. Get lifting help or use power lifting equipment such as a fork lift to move heavy items.
2.Using the help of assistants, carefully lift the lathe onto the stands and align the mounting holes.
Note: The headstock end of the lathe is the heaviest and usually requires two people for lifting that end.