Test Run

Once the assembly is complete, test run your machine to make sure it runs properly and is ready for regular operation. The test run consists of verifying the following: 1) The motor powers up and runs correctly and 2) the stop button safety feature works correctly.

If, during the test run, you cannot easily locate the source of an unusual noise or vibration, stop using the machine immediately, then review Troubleshooting on Page 36.

If you cannot find a remedy, contact our Tech Support at (570) 546-9663 for assistance.

Before starting the lathe, make sure you have performed the preceding assembly and adjustment instructions, and you have read through the rest of the manual and are familiar with the various functions and safety features on this machine. Failure to follow this warning could result in serious personal injury or even death!

To test run your lathe:

1.Make sure you understand the safety instruc- tions at the beginning of the manual and that the machine is setup properly.

2.Make sure all tools and objects used during setup are cleared away from the machine.

3.Connect the machine to the power source.

4.Push the EMERGENCY stop button in, then twist it clockwise so it pops out. When the button pops out, the switch is reset and ready for operation (see Figure 16).

��	�
�	�
��	��
��	��

Figure 16. Resetting the EMERGENCY stop

switch.

5.Verify that the machine is operating correctly by pressing the REV/FWD switch to FWD.

—When operating correctly, the machine runs smoothly with little or no vibration or rubbing noises.

—Investigate and correct strange or unusual noises or vibrations before operating the machine further. Always disconnect the machine from power when investigating or correcting potential problems.

6.Press the REV/FWD switch to the center neutral position to stop the machine, and push in the EMERGENCY stop button.

7.WITHOUT resetting the EMERGENCY stop button, press the press the REV/FWD switch to FWD. The machine should not start.

—If the machine does not start, the EMERGENCY stop button safety feature is working correctly. The Test Run is com- plete.

—If the machine does start (with the EMERGENCY stop button pushed in), immediately disconnect power to the machine. The EMERGENCY stop button safety feature is not working correctly. This safety feature must work properly before

proceeding with regular operations. Call Tech Support for help.

-18-	G0632 16" x 42" Variable Speed Wood Lathe

G0632 specifications

The Grizzly G0632 is a versatile and powerful wood lathe, designed for both professional woodworkers and hobbyists seeking to expand their craft. Renowned for its robust construction and user-friendly features, the G0632 is ideal for turning bowls, spindles, and various wood projects.

One of the standout features of the Grizzly G0632 is its powerful 1 HP motor, which delivers consistent performance for a variety of turning applications. The motor is capable of running at variable speeds ranging from 450 to 3,200 RPM. This range offers woodworkers the flexibility to choose the optimal speed for their specific project, whether it be a delicate spindle or a larger, more robust bowl.

The lathe's bed is made from heavy-duty cast iron, providing exceptional stability and reducing vibration during operation. This is crucial in achieving smooth finishes on your workpieces. The robust construction also means that the G0632 can handle larger, heavier pieces of wood without compromising performance.

Another significant characteristic of the G0632 is its easy-to-use swivel headstock. This feature allows users to turn larger projects without the need for an extension, providing greater versatility in positioning the workpiece. The headstock can be locked in place to maintain accuracy during turning.

The G0632 also boasts a 12-inch swing capacity over the bed, allowing for turning objects up to 12 inches in diameter. Coupled with a 36-inch distance between centers, this lathe provides ample space for a range of projects, from small bowls to longer spindles.

In terms of technology, Grizzly has equipped the G0632 with a quick-release tailstock, which simplifies the process of adjusting and positioning your workpiece. It also features a 4-position indexing head, which is perfect for creating intricate designs and patterns on your work.

For added safety, the G0632 includes a sturdy handwheel for manual control, ensuring that users can operate the lathe comfortably and securely. Additionally, the lathe's overall design promotes ease of use, making it a great choice for both experienced woodworkers and newcomers.

In summary, the Grizzly G0632 wood lathe encapsulates quality and functionality, making it a valuable addition to any workshop. Its powerful motor, sturdy construction, and user-friendly features combine to provide an unparalleled turning experience. Whether you're crafting detailed spindles or larger projects, the G0632 is designed to meet your woodworking needs.

Grizzly G0632 owner manual Test Run

Models: G0632