B
C
A
D
E
Figure 3. Model G0632 control panel.
A.Front Belt Access Panel—Remove this panel to access the drive belt and pulleys for changing speed ranges.
B.RPM Readout—Shows spindle RPM.
C.Emergency Stop Button—Disconnects power to the motor when pushed in. Rotate clockwise to let it pop out and reconnect power to the motor.
D.REV/FWD Switch—Used to reverse the spindle direction.
E.Variable Speed Dial—Varies the spindle speed from 0 RPM's to the upper limit for the selected RPM range.
NOTICE
The frequency inverter controls on the rear of the headstock have no effect on the oper- ation of the lathe. Opening the frequency inverter will void the lathe warranty and could seriously damage the lathe. DO NOT open the case of the frequency inverter.
G0632 16" x 42" Variable Speed Wood Lathe |
