321 Studios 69488 owner manual Tool Set Up, Safety Setup Operation

Page 11

Tool Set Up

To prevent serious injury from accidental operation:

Turn the Power Switch of the pressure washer off, unplug it from its electrical outlet, and relieve all pressure in a safe manner before making adjustments or installing accessories.

1.Make sure the washer is clean and ready for use. Ensure the inlet water strainer, nozzle, and the rest of the Washer are completely free of buildup or debris.

2.If using the Extension Nozzle, insert it into the end of the gun, pressing in and twisting, until it clicks into place.

If using the Soap Dispenser:

a.Remove the dispenser lid and fill with pressure washer detergent (sold separately).

b.Set the spray to the fan setting by turning the end of the Extension Nozzle counterclockwise.

c. Insert the Extension Nozzle into the Dispenser cap, pressing and twisting, until it clicks into place (shown at right).

3. Before connecting the water supply, run water through the garden hose (sold separately) to remove any debris.

4.Turn off the water, then thread the garden hose onto the Water Supply Inlet on the front of the Pressure Washer.

Safety

Setup

Operation

5.Plug the Power Cord into a power outlet and test the GFCI by pressing the Reset Button, then the Test button, then the Reset Button again, as described in

Controls and Features section.

Note: The Pressure Washer will not work if the GFCI is not properly reset.

Reset Button

Test Button

Maintenance

SKU 69488

For technical questions, please call 1-800-444-3353.

Page 11

Image 11
Contents Electric pressure Washer Table of Contents Maintenance Safety WarningsSet up Precautions Safety Setup OperationOperating Precautions Servicing a Double-Insulated Appliance SafetySetup Operation Maintenance Vibration HazardEtupS AtierOp Nanc Maint SymbologyTyfeSa Components Safety Setup Operation MaintenanceSpecifications Setup Before UseAtierOp Nanc Maint AssemblyTyfeSa EtupS Operation Maintenance FeaturesSafety Setup Operating Instructions Work Piece and Work Area Set UpTool Set Up General Operating Instructions Become Familiar With your Machine Operating TipsMaintenance and Servicing Cleaning, Maintenance, and LubricationProblem Possible Causes Likely Solutions TroubleshootingTyfe Pump Assembly Parts ListParts Lists and Assembly Diagrams DiagramPump Assembly Pressure Washer Parts List and Assembly Diagram Please Read the Following Carefully Limited 90 Day Warranty