321 Studios 69488 owner manual Assembly, TyfeSa EtupS, AtierOp Nanc Maint

Page 8

tyfeSa

etupS

Assembly

Note: For additional information regarding the parts listed in the following pages,

refer to Parts Lists and Assembly Diagrams on page 16.

Some of the following assembly steps may have been performed at the factory.

1.Check the Inlet Strainer for any blockage, including packaging debris. Remove any plastic plugs from the water inlet/outlet.

2.Attach the Gun/Extension Nozzle holder to the side of the body.

3.Attach the Handle to the front of the Body with the four included Screws.

atierOp

e nanc Maint

4.Thread the High Pressure Hose onto the Pressure Hose Outlet on the back of the body.

5. Thread the High Pressure Hose to the Spray Gun.

Page 8

For technical questions, please call 1-800-444-3353.

SKU 69488

Image 8

Contents Electric pressure Washer Table of Contents Safety Warnings Set up PrecautionsSafety Setup Operation MaintenanceOperating Precautions Safety Setup Operation MaintenanceVibration Hazard Servicing a Double-Insulated ApplianceEtupS AtierOp Nanc Maint SymbologyTyfeSa Safety Setup Operation Maintenance SpecificationsSetup Before Use ComponentsAtierOp Nanc Maint AssemblyTyfeSa EtupS Operation Maintenance FeaturesSafety Setup Work Piece and Work Area Set Up Operating InstructionsTool Set Up General Operating Instructions Operating Tips Become Familiar With your MachineCleaning, Maintenance, and Lubrication Maintenance and ServicingTroubleshooting Problem Possible Causes Likely SolutionsTyfe Pump Assembly Parts ListParts Lists and Assembly Diagrams DiagramPump Assembly Pressure Washer Parts List and Assembly Diagram Please Read the Following Carefully Limited 90 Day Warranty