General Operating Instructions
tyfeSa
etupS
1.Point the Nozzle in a safe direction. Press in the Safety Lock Button to unlock the Trigger and squeeze the Trigger to check that all pressure is released from the unit. Release the Trigger.
Note: The Gun’s safety lock feature locks the Trigger when not in use. To unlock the unit and use the gun,
press the Safety |
| |
Lock Button and |
| |
squeeze the |
| |
Trigger. The | Trigger | |
safety lock will | ||
| ||
Safety Lock | ||
you release the | ||
Button | ||
Trigger. | ||
|
2. Turn on the water supply.
Note: If the unit does not turn on or turns off suddenly, check and reset the GFCI.
4.Unlock the Safety Lock Button and squeeze the Trigger to start the stream. Be aware that when it is first started, the gun will kick back.
5.Test spray the edge of the surface to be cleaned to make sure that the stream is not too strong for the surface. Adjust the pressure by squeezing the Trigger more or less, and by changing your distance from the surface. Adjust the stream from a fan to a direct stream by turning the nozzle.
6.When finished using the Pressure Washer, release the Trigger, turn the Power Switch off, unplug the unit, and turn off the water supply.
7.Point the Nozzle in a safe direction and press the Safety Lock Button and squeeze the trigger to check that all pressure is released from the unit. Release the Trigger.
8.Clean, then store indoors, out of children’s reach.
atierOp
e nanc Maint
3. Turn on the Power Switch.
Power
Switch
ON
Page 12 | For technical questions, please call | SKU 69488 |