Features
Note: Familiarize yourself with the location and function of all of the machine’s controls before proceeding to setup of the machine.
1.This item is equipped with a
GFCI (Ground Fault Circuit Interruption) plug. Read and follow these GFCI precautions: WARNING! To prevent electric shock and death:
Test GFCI (Ground Fault Circuit Interrupter) before each use as follows:
INDICATOR
RESET
BUTTON
TEST
BUTTON
The GFCI device does not protect against electrical shock due to contact with both circuit conductors or a fault in any wiring supplying this device.
Should replacement of the GFCI Power Plug become necessary, only a qualified technician should perform the service.
Do not alter or disable the GFCI Power Plug.
To allow the GFCI unit to function properly, extension cords must not be used with this pressure washer.
2.The Spray Control Sleeve on the Spray Wand can be rotated for a range of spray patterns, from a full fan spray to a direct stream spray.
Safety
Setup
FIGURE A
a.Make sure the trigger is released and plug GFCI into power outlet. Press reset button. Indicator should turn on.
b.Press test button. Indicator should turn off.
c.Press reset button again for use. Do not use if above test fails.
SKU 69488 | For technical questions, please call |
Operation
Maintenance
Page 9