Frequently Asked Questions
Problems | Recommendations |
|
|
|
|
If you can't open the | • Release the pressure by turning the valve to |
|
lid: | the “pressure release” position. |
|
| • Check that there is no longer any pressure. |
|
| • If necessary, put back on the heat for a few |
|
| seconds with the valve on position “Release”. |
|
|
|
|
If the Pressure Cooker | • Get the Pressure Cooker checked in a TEFAL | EN |
has been heated | Approved Service Centre. |
|
without any liquid |
|
|
inside: |
|
|
|
|
|
If there is no steam | • Pressure has not risen inside the Pressure |
|
coming out of the | Cooker. This is usual during the first few |
|
pressure regulator valve: | minutes of heating. |
|
|
|
|
If the problem persists, | • The source of heat must be quite strong, |
|
check that: | otherwise increase it. |
|
| • The quantity of liquid in the pan is sufficient. |
|
| • The pressure regulator valve is in position. |
|
| • The pressure cooker is closed correctly. If |
|
| required, tighten the button. |
|
| • The pressure regulator valve is not dirty. |
|
| • The gasket and rim of the pan are not |
|
| damaged. |
|
|
|
|
If the safety valve is | • Turn off the heat. |
|
activated: | • Let the Pressure Cooker cool down. |
|
| • Check the steam release rod, the operating |
|
| valve, the safety valve and the valve. |
|
|
|
|
If steam leaks out | • That the lid is properly closed. If necessary, |
|
around the lid, check: | tighten it. |
|
| • That the gasket is in good condition. |
|
| • That the gasket is correctly positioned inside |
|
| the lid. |
|
| • That the lid, safety valve and pressure |
|
| regulator valve are clean. |
|
| • That the rim of the pan is not damaged. |
|
|
|
|
36