HP 10 manual Removal and replacement procedures, Back cover, Description Spare part number

Page 25

Removal and replacement procedures

CAUTION: Components described in this chapter should only be accessed by an authorized service provider. Accessing these parts can damage the tablet and void the warranty.

This chapter provides removal and replacement procedures for authorized service provider only parts.

There are as many as 19 screws that must be removed, replaced, and/or loosened when servicing the tablet. Make special note of each screw size and location during removal and replacement.

Back cover

Description

Spare part number

 

 

Back cover (includes internal shielding)

736881-001

 

 

10.1-in, AG, LED, WUXGA, TouchScreen, display assembly

739812-001

NOTE: The display assembly does not include the display panel cable. The display panel cable

 

is available using spare part number 739817-001.

 

 

 

Before disassembling the tablet, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

Remove the back cover:

CAUTION: Before turning the display assembly upside down, make sure the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display assembly.

1.Place the tablet on a flat surface, display panel side down, with the power button toward you.

CAUTION: When inserting the plastic tool into the tablet as described in Step 2, make sure not to insert the tool into the power button area. Failure to follow this caution can result in damage to the tablet.

2.Insert a thin, plastic tool (1) between the back cover and the display assembly. The first insertion point should be between the power button (2) and the middle of the top edge (3) of the

back cover.

3.Separate the top edge of the back cover (4) from the display assembly.

CAUTION: When removing the back cover, make sure the bottom edge, opposite the power button, is the last edge removed. Failure to follow this caution can result in damage to the tablet.

Removal and replacement procedures

19

Image 25
Contents HP Omni10 Software terms Product noticeSafety warning notice Iv Safety warning notice Table of contents Power cord set requirements Product description Serviceability End user replaceable part AC adapter Power requirementsCategory Description External expansion PortsFinding your hardware and software information External component identificationLocating hardware Item Component Description FrontComponent Description BackTop edge Back edge Labels Locating the serial number, product number, and model number Illustrated parts catalogIllustrated parts catalog Tablet major componentsMiscellaneous parts Component Spare part number HP Omni 10 Tablet Sequential part number listingScrew Kit Spare part number DescriptionSequential part number listing Service considerations Removal and replacement proceduresTools required Plastic partsCables and connectors Electrostatic discharge damage Grounding guidelinesPackaging and transporting guidelines Material Use Voltage protection level Equipment guidelinesBack cover Removal and replacement proceduresDescription Spare part number Power button board Page Volume button board Page Front-facing webcamera Page Light sensor board Rear-facing webcamera Page Audio board Page Vibrator module Battery Page 744496-001 Wireless antennasTransceivers Page SIM/card reader board Speakers Page Description Spare part number Display panel cable 739817-001 Display panel cablePage System board Page Page Starting Setup Utility Bios Using Setup Utility BiosUpdating the Bios Downloading a Bios update Determining the Bios versionPage Specifications Creating a Microsoft recovery drive select models only Backing up, restoring, and recoveringRemoving everything and reinstalling Windows Using Windows Refresh for quick and easy recoveryBacking up data using File History Requirements for all countries Power cord set requirementsRequirements for specific countries and regions Country/region Accredited agency Applicable note numberPower cord set requirements Recycling Hdmi IndexSystem board
Related manuals
Manual 38 pages 45.85 Kb