Display panel cable
Description | Spare part number |
|
|
Display panel cable |
|
|
|
Before removing the display panel cable, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 19).
5.Disconnect the battery cable from the system board (see Power button board on page 20), and then remove the following components:
a.Volume button board (see Volume button board on page 22)
b.Audio board (see Audio board on page 29)
c.Battery (see Battery on page 32)
d.SIM/card reader board (see SIM/card reader board on page 36)
Remove the display panel cable:
1.Release the ZIF connector (1) to which the display panel cable is attached, and then disconnect the display panel cable from the system board.
2.Release the ZIF connector (2) to which the display panel cable is attached, and then disconnect the display panel cable from the display assembly.
Removal and replacement procedures | 39 |