Vibrator module
Description | Spare part number |
|
|
Vibrator module (includes cable) | |
|
|
Before removing the vibrator module, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 19).
5.Disconnect the battery cable from the system board (see Power button board on page 20). Remove the vibrator module:
1.Disconnect the vibrator module cable (1) from the system board.
2.Release the vibrator module (2) from the clip molded into the display assembly.
3.Remove the vibrator module and cable. Reverse this procedure to install the vibrator module.
Removal and replacement procedures | 31 |