HP 8 II 1411 manual Removal and replacement procedures, Tablet component replacement procedures

Page 18

5Removal and replacement procedures

Tablet component replacement procedures

CAUTION: Tablet components described in this chapter should only be accessed by an authorized service provider. Accessing these parts can damage the tablet and void the warranty.

This chapter provides removal and replacement procedures for authorized service provider only parts.

There are as many as 7 screws that must be removed, replaced, and/or loosened when servicing the tablet. Make special note of each screw size and location during removal and replacement.

Back cover

Description

Spare part number

 

 

Back cover (includes wireless antenna cable and transceiver)

785173-001

 

 

Display panel assembly (7.85-in, 1024×768, IPS, 5-point capacitive, TouchScreen; includes

785177-001

display panel cable and TouchScreen cable)

 

 

 

Before disassembling the tablet, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

Remove the back cover:

CAUTION: Before turning the display panel assembly upside down, make sure the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display panel assembly.

1.Place the tablet on a flat surface, display panel side down, with the SD Card slot and volume control buttons toward you.

CAUTION: When inserting the plastic tool into the tablet as described in Step 2, make sure not to insert the tool into the volume control buttons area. Failure to follow this caution can result in damage to the tablet.

12 Chapter 5 Removal and replacement procedures

Image 18
Contents HP 8 G21411 Tablet Product notice Software termsSafety warning notice Iv Safety warning notice Table of contents Power cord set requirements Product description Serviceability Category DescriptionOperating system External component identification Illustrated parts catalog Tablet major components 785180-001Miscellaneous parts Sequential part number listingSequential part number listing Removal and replacement preliminary requirements Service considerationsTools required Grounding guidelines Typical electrostatic voltage levelsEvent 10% 40% 55% Packaging and transporting guidelines Equipment guidelines Material Use Voltage protection levelBack cover Removal and replacement proceduresTablet component replacement procedures Description Spare part numberPage Battery Power/volume button board Front-facing webcam Page Rear-facing webcam Speakers System board Page Page Specifications Backing up and recovering your data Factory data resetUpdating apps, widgets, and the operating system Requirements for specific countries and regions Power cord set requirementsRequirements for all countries Country/region Accredited agency Applicable note numberPower cord set requirements Recycling Index