HP 8 II 1411 manual Rear-facing webcam

Rear-facing webcam

Description	Spare part number
2.0-MP, fixed-focus, rear-facing webcam (includes cable)	773139-001

Before removing the rear-facing webcam, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

4.Remove the back cover (see Back cover on page 12).

5.Disconnect the battery cable from the system board (see Battery on page 14).

Remove the rear-facing webcam:

1.Release the ZIF connector (1) to which the rear-facing webcam cable is attached, and then disconnect the rear-facing webcam cable from the system board.

2.Release the rear-facing webcam (2) from the molding built into the display panel assembly.

3.Remove the rear-facing webcam and cable. Reverse this procedure to install the rear-facing webcam.

18 Chapter 5 Removal and replacement procedures