2.Detach the battery (2) from the display panel assembly. (The battery is attached to the display panel assembly with
3. Remove the battery.
Reverse this procedure to install the battery.
Power/volume button board
Description | Spare part number |
|
|
Power/volume button board (includes cable) | |
|
|
Before removing the power/volume button board, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 12).
5.Disconnect the battery cable from the system board (see Battery on page 14).
Remove the power/volume button board:
1.Release the zero insertion force (ZIF) connector (1) to which the power/volume button board cable is attached, and then disconnect the power/volume button board cable from the system board.
Power/volume button board 15