HP dc73 Blade Client manual 27Installing the Optical Drive

Page 39

8.Install two M3 metric guide screws in the lower holes on each side of the drive. HP has provided four extra M3 metric guide screws on the front of the chassis, under the front bezel. The M3 metric guide screws are black. Refer to Installing and Removing Drives on page 27 for an illustration of the extra M3 metric guide screws location.

CAUTION: Use only 5-mm long screws as guide screws. Longer screws can damage the internal components of the drive.

NOTE: When replacing the drive, transfer the four M3 metric guide screws from the old drive to the new one.

Figure 2-26Installing Guide Screws in the Optical Drive

9.Position the guide screws on the drive into the J-slots in the drive bay. Then slide the drive toward the front of the computer until it locks into place.

Figure 2-27Installing the Optical Drive

ENWW

Installing and Removing Drives 33

Page 38 Page 40
Image 39
Page 38 Page 40
Contents HP Compaq Business PC Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix C External Security Devices Standard Configuration Features Product Features1Front Panel Components Front Panel Components2Media Card Reader Components Media Card Reader Components3Rear Panel Components Rear Panel Components4Keyboard Components Keyboard5Windows Logo Key Functions Using the Windows Logo KeySerial Number Location Special Mouse FunctionsServiceability Features Hardware UpgradesUsing the Small Form Factor Computer in a Tower Orientation Enww Smart Cover FailSafe Key Unlocking the Smart Cover LockEnww 4Removing the Access Panel Removing the Computer Access Panel5Replacing the Access Panel Hardware Upgrades Replacing the Computer Access Panel6Removing the Front Bezel Removing the Front BezelRemoving Bezel Blanks 9Replacing the Front Bezel Replacing the Front BezelInstalling Additional Memory DIMMsDDR2-SDRAM DIMMs 1DIMM Socket Locations Populating Dimm SocketsInstalling DIMMs Enww 2Expansion Slot Locations Removing or Installing an Expansion Card14Removing an Expansion Slot Cover Enww Enww 3Drive Positions Drive Positions19Secondary Hard Drive 6-32 Guide Screws Location Installing and Removing DrivesEnww 4System Board Drive Connections System Board Drive ConnectionsRemoving an Optical Drive 24Rotating the Drive Cage Down 25Removing the Optical Drive Installing an Optical Drive into the 5.25-inch Drive Bay27Installing the Optical Drive Enww Removing an External 3.5-inch Drive Enww Installing a Drive into the 3.5-inch External Drive Bay Enww Enww Enww Enww Removing and Replacing a Removable 3.5-inch Sata Hard Drive 40Removing the Thermal Sensor Hardware UpgradesEnww Enww Enww Table A-1Specifications SpecificationsStandard PS 4A @ 100 VAC 2A @ 200 VAC Plus PS 5A @ 100VAC Battery Replacement Type Enww Installing a Security Lock External Security DevicesCable Lock Padlock HP Business PC Security Lock Enww Electrostatic Discharge Preventing Electrostatic DamageGrounding Methods Computer Operating Guidelines and Routine Care Shipping Preparation Optical Drive PrecautionsCleaning SafetyIndex Enww
Related manuals
Manual 79 pages 17.44 Kb
Top Page Image Contents