8.Place the thermal sensor on top of the hard drive in a position that does not cover the label (1) and attach the thermal sensor to the top of the hard drive with the adhesive strip (2).
Figure 2-45 Replacing the Thermal Sensor
9.Slide the cover on the carrier (1) and replace the screw on the rear of the carrier to secure the cover in place (2).
Figure 2-46 Replacing the Carrier Cover
10.Slide the hard drive carrier into the enclosure on the computer and lock it with the key provided.
NOTE: The carrier must be locked for power to be supplied to the hard drive.
ENWW | Installing and Removing Drives 45 |