HP dc73 Blade Client manual Enww

Page 44

3.Position the guide screws on the drive into the J-slots in the drive bay. Then slide the drive toward the front of the computer until it locks into place.

Figure 2-34Installing a Drive into the 3.5-inch Drive Bay (Diskette Drive shown)

4.Connect the appropriate drive cables:

a.If installing a diskette drive, connect the power and data cables to the rear of the drive and connect the other end of the data cable to the connector on the system board labeled FLOPPY.

b.If installing a second hard drive, connect the power and data cables to the rear of the drive and connect the other end of the data cable to the next available (unpopulated) SATA connector on the system board by following the numbered sequence of the connectors.

c.If installing a media card reader, connect the USB cable from the media card reader to the USB connector on the system board labeled MEDIA.

5.Replace the optical drive.

6.Replace the front bezel and access panel.

7.If the computer was on a stand, replace the stand.

8.Reconnect the power cord and turn on the computer.

9.Lock any security devices that were disengaged when the access panel was removed.

38 Chapter 2 Hardware Upgrades

ENWW

Image 44

Contents HP Compaq Business PC Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix C External Security Devices Product Features Standard Configuration FeaturesFront Panel Components 1Front Panel ComponentsMedia Card Reader Components 2Media Card Reader ComponentsRear Panel Components 3Rear Panel ComponentsKeyboard 4Keyboard ComponentsUsing the Windows Logo Key 5Windows Logo Key FunctionsSpecial Mouse Functions Serial Number LocationHardware Upgrades Serviceability FeaturesUsing the Small Form Factor Computer in a Tower Orientation Enww Unlocking the Smart Cover Lock Smart Cover FailSafe KeyEnww Removing the Computer Access Panel 4Removing the Access PanelReplacing the Computer Access Panel 5Replacing the Access Panel Hardware UpgradesRemoving the Front Bezel 6Removing the Front BezelRemoving Bezel Blanks Replacing the Front Bezel 9Replacing the Front BezelDDR2-SDRAM DIMMs Installing Additional MemoryDIMMs Populating Dimm Sockets 1DIMM Socket LocationsInstalling DIMMs Enww Removing or Installing an Expansion Card 2Expansion Slot Locations14Removing an Expansion Slot Cover Enww Enww Drive Positions 3Drive PositionsInstalling and Removing Drives 19Secondary Hard Drive 6-32 Guide Screws LocationEnww System Board Drive Connections 4System Board Drive ConnectionsRemoving an Optical Drive 24Rotating the Drive Cage Down Installing an Optical Drive into the 5.25-inch Drive Bay 25Removing the Optical Drive27Installing the Optical Drive Enww Removing an External 3.5-inch Drive Enww Installing a Drive into the 3.5-inch External Drive Bay Enww Enww Enww Enww 40Removing the Thermal Sensor Hardware Upgrades Removing and Replacing a Removable 3.5-inch Sata Hard DriveEnww Enww Enww Specifications Table A-1SpecificationsStandard PS 4A @ 100 VAC 2A @ 200 VAC Plus PS 5A @ 100VAC Battery Replacement Type Enww Cable Lock Installing a Security LockExternal Security Devices Padlock HP Business PC Security Lock Enww Grounding Methods Electrostatic DischargePreventing Electrostatic Damage Computer Operating Guidelines and Routine Care Optical Drive Precautions CleaningSafety Shipping PreparationIndex Enww

Related manuals

Manual 79 pages 17.44 Kb