HP dc73 Blade Client manual Computer Operating Guidelines and Routine Care

Page 62

EComputer Operating Guidelines, Routine Care and Shipping Preparation

Computer Operating Guidelines and Routine Care

Follow these guidelines to properly set up and care for the computer and monitor:

Keep the computer away from excessive moisture, direct sunlight, and extremes of heat and cold.

Operate the computer on a sturdy, level surface. Leave a 10.2-cm (4-inch) clearance on all vented sides of the computer and above the monitor to permit the required airflow.

Never restrict the airflow into the computer by blocking any vents or air intakes. Do not place the keyboard, with the keyboard feet down, directly against the front of the desktop unit as this also restricts airflow.

Never operate the computer with the access panel or any of the expansion card slot covers removed.

Do not stack computers on top of each other or place computers so near each other that they are subject to each other’s re-circulated or preheated air.

If the computer is to be operated within a separate enclosure, intake and exhaust ventilation must be provided on the enclosure, and the same operating guidelines listed above will still apply.

Keep liquids away from the computer and keyboard.

Never cover the ventilation slots on the monitor with any type of material.

Install or enable power management functions of the operating system or other software, including sleep states.

Turn off the computer before you do either of the following:

Wipe the exterior of the computer with a soft, damp cloth as needed. Using cleaning products may discolor or damage the finish.

Occasionally clean the air vents on all vented sides of the computer. Lint, dust, and other foreign matter can block the vents and limit the airflow.

56 Appendix E Computer Operating Guidelines, Routine Care and Shipping Preparation

ENWW

Image 62
Contents HP Compaq Business PC Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix C External Security Devices Product Features Standard Configuration FeaturesFront Panel Components 1Front Panel ComponentsMedia Card Reader Components 2Media Card Reader ComponentsRear Panel Components 3Rear Panel ComponentsKeyboard 4Keyboard ComponentsUsing the Windows Logo Key 5Windows Logo Key FunctionsSpecial Mouse Functions Serial Number LocationHardware Upgrades Serviceability FeaturesUsing the Small Form Factor Computer in a Tower Orientation Enww Unlocking the Smart Cover Lock Smart Cover FailSafe KeyEnww Removing the Computer Access Panel 4Removing the Access PanelReplacing the Computer Access Panel 5Replacing the Access Panel Hardware UpgradesRemoving the Front Bezel 6Removing the Front BezelRemoving Bezel Blanks Replacing the Front Bezel 9Replacing the Front BezelDDR2-SDRAM DIMMs Installing Additional MemoryDIMMs Populating Dimm Sockets 1DIMM Socket LocationsInstalling DIMMs Enww Removing or Installing an Expansion Card 2Expansion Slot Locations14Removing an Expansion Slot Cover Enww Enww Drive Positions 3Drive PositionsInstalling and Removing Drives 19Secondary Hard Drive 6-32 Guide Screws LocationEnww System Board Drive Connections 4System Board Drive ConnectionsRemoving an Optical Drive 24Rotating the Drive Cage Down Installing an Optical Drive into the 5.25-inch Drive Bay 25Removing the Optical Drive27Installing the Optical Drive Enww Removing an External 3.5-inch Drive Enww Installing a Drive into the 3.5-inch External Drive Bay Enww Enww Enww Enww 40Removing the Thermal Sensor Hardware Upgrades Removing and Replacing a Removable 3.5-inch Sata Hard DriveEnww Enww Enww Specifications Table A-1SpecificationsStandard PS 4A @ 100 VAC 2A @ 200 VAC Plus PS 5A @ 100VAC Battery Replacement Type Enww Cable Lock Installing a Security LockExternal Security Devices Padlock HP Business PC Security Lock Enww Grounding Methods Electrostatic DischargePreventing Electrostatic Damage Computer Operating Guidelines and Routine Care Safety Optical Drive PrecautionsCleaning Shipping PreparationIndex Enww