Installing the External Pump

OPTION 3: EXTERNAL VERTICAL PUMP

INSTALLING THE EXTERNAL PUMP

Step 1: To install Dehumidifier Drain Hose, refer to Gravity Drain Using Dehumidifier Hose instructions starting on page 9.

Step 2: For optimal operation, it is recommended that the pump is placed on a flat and level location. Attach the water pump to a wall or other perpendicular flat surface with the included screws for security. (Fig. 12)

(FIG. 12)

Step 3: Remove red cap from drain hose connector on pump. Attach the small drain hose clamp onto the pump drain hose. (Fig. 13)

(FIG. 13)

INSTALLING THE EXTERNAL PUMP

Step 4: Insert pump drain hose onto pump connector until it is fully seated. Secure hose by pushing small clamp forward towards the pump. (Fig. 14)

(FIG. 14)

Step 5: Secure hose by pushing small clamp forward towards the pump. (Fig. 15)

(FIG. 15)

Step 6: Insert the angled end of the dehumidifier drain hose into the water pump tank. (Fig. 16).

(FIG. 16)