HP 7 Beats 4501us manual System board, Description Spare part number

System board

Description	Spare part number
System board equipped with an NVIDIA Tegra 4 A15 1.80-GHz quad core processor, a graphics	767530-001
subsystem with UMA memory, 1.0-GB DDR3L 1600 system memory, and a 16-GB
eMMC hard drive

Before removing the system board, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

4.Remove the back cover (see Back cover on page 11).

5.Disconnect the battery cable from the system board (see Battery on page 13).

Remove the system board:

1.Disconnect the following cables from the system board:

(1)Display panel cable

(2)TouchScreen zero insertion force (ZIF) connectors and cables (2)

(3)Front-facing webcam ZIF connector and cable

(4)I/O board ZIF connector and cable

(5)Rear-facing webcam ZIF connector and cable

System board 17