HP 7 Beats 4501us manual Rear-facing webcam, Description Spare part number

Rear-facing webcam

Description	Spare part number
Rear-facing webcam (includes cable)	753193-001

Before removing the rear-facing webcam, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

4.Remove the back cover (see Back cover on page 11).

5.Disconnect the battery cable from the system board (see Battery on page 13).

6.Remove the top speaker (see Speakers on page 15).

Remove the rear-facing webcam:

1.Detach the grounding tape (1) that secures the rear-facing webcam cable to the display panel assembly.

2.Release the ZIF connector (2) to which the rear-facing webcam cable is attached, and then disconnect the rear-facing webcam cable from the system board.

3.Release the rear-facing webcam (3) from the molding built into the display panel assembly.

4.Remove the rear-facing webcam and cable. Reverse this procedure to install the rear-facing webcam.

Rear-facing webcam 23