HP 7 Beats 4501us manual Equipment guidelines, Material Use Voltage protection level

Page 16

Equipment guidelines

Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.

When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly against the skin at all times. On grounded mats with banana-plug connectors, use alligator clips to connect a wrist strap.

When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps) can be used at standing workstations and are compatible with most types of shoes or boots. On conductive floors or dissipative floor mats, use foot straps on both feet with a minimum of one megohm resistance between the operator and ground. To be effective, the conductive must be worn in contact with the skin.

The following grounding equipment is recommended to prevent electrostatic damage:

Antistatic tape

Antistatic smocks, aprons, and sleeve protectors

Conductive bins and other assembly or soldering aids

Nonconductive foam

Conductive tabletop workstations with ground cords of one megohm resistance

Static-dissipative tables or floor mats with hard ties to the ground

Field service kits

Static awareness labels

Material-handling packages

Nonconductive plastic bags, tubes, or boxes

Metal tote boxes

Electrostatic voltage levels and protective materials

The following table lists the shielding protection provided by antistatic bags and floor mats.

Material

Use

Voltage protection level

 

 

 

Antistatic plastics

Bags

1,500 V

 

 

 

Carbon-loaded plastic

Floor mats

7,500 V

 

 

 

Metallized laminate

Floor mats

5,000 V

 

 

 

10

Chapter 3 Removal and replacement preliminary requirements

Image 16
Contents HP Slate7 Beats Special Edition Product notice Software termsSafety warning notice Iv Safety warning notice Table of contents Power cord set requirements Product description Category Description Ports Power requirementsOperating system Illustrated parts catalog Locating the serial number, product number, and model numberComponent Spare part number Back cover Tablet major componentsSpeaker Kit , includes Miscellaneous parts Sequential part number listingDisplay panel cable and TouchScreen cable Service considerations Removal and replacement preliminary requirementsTools required Grounding guidelines Electrostatic discharge damagePackaging and transporting guidelines Equipment guidelines Material Use Voltage protection levelRemoval and replacement procedures Tablet component replacement proceduresBack cover Description Spare part numberPage Battery Page Speakers Removal and replacement procedures System board Page Antenna Front-facing webcam Board Page Rear-facing webcam Specifications Back up and reset Backing up and recovering your dataUpdating apps, widgets, and the operating system Factory data reset Resetting with the tablet powered off Power cord set requirements Requirements for all countriesRequirements for specific countries and regions Country/region Accredited agency Applicable note numberVDE Recycling Index Tablet
Related manuals
Manual 22 pages 21.39 Kb