CAUTION: Before turning the display panel assembly upside down, make sure the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display panel assembly.
1.Place the tablet on a flat surface, display panel side down, with the volume control buttons toward you.
CAUTION: When inserting the plastic tool into the tablet as described in Step 2, make sure not to insert the tool into the volume control buttons area. Failure to follow this caution can result in damage to the tablet.
2.Insert a case utility tool (1) between the back cover and the display panel assembly. The first insertion point should be near the rear right corner of the tablet.
3.Lift the bottom edge of the back cover (2) until it separates from the display panel assembly.
4.Remove the back cover (3).
Reverse this procedure to install the back cover.
12 | Chapter 4 Removal and replacement procedures |