HP A7540-96010 manual Dimensions, Electrical, Environmental

Page 61

Specifications

Dimensions

Table 7: 2/8q FC Switch chassis dimensions

Item

Dimension

Width

17 inches (432 mm), 19-inch rack mount

 

 

Height

1.70 inches (43.2 mm) (1U)

 

 

Depth

12.0 inches (305 mm)

 

 

Weight

9 lbs (4.08 Kg)

 

 

Electrical

Table 8: Electrical requirements

 

 

 

Item

Requirement

Operating voltage

90 to 240 VAC; 50 to 60 Hz

 

 

Power source loading (maximum)

0.5 A at 120 VAC

 

0.25 A at 240 VAC

 

 

Heat Output (maximum)

50 watts

 

 

Circuit Protection

Internally fused

 

 

Environmental

Table 9: Environmental requirements

 

 

 

Item

Requirement

Temperature

 

Operating

5° - 40°C (41 - 104°F)

Non-operating

-40° - 70°C (-4 - 158°F)

 

 

Humidity

 

Operating

15% - 80%, non-condensing

Non-operating

25% - 90%, non-condensing

 

 

Altitude

 

Operating

0 - 3048m (0 - 10,000 feet)

Non-operating

0 - 15,240m (0 - 50,000 feet)

 

 

Vibration

IEC 68-2

Operating

5-500 Hz, random, 0.21 G rms, 10 minutes

Non-operating

5-500 Hz, random, 2.09 G rms, 10 minutes

 

 

Shock

IEC 68-2

Operating

4 g, 11ms, 20 repetitions

Non-operating

30g, 292 ips, 3 repetitions, 3 axis

 

 

Air flow

Bezel side to port side

 

 

HP StorageWorks 2/8q Fibre Channel Switch Installation Guide

61

Image 61
Contents HP StorageWorks 8q Fibre Channel Switch Copyright 2004 Hewlett-Packard Development Company, L.P Contents Troubleshooting Maintenance menu Remove Switch Config Figures Related documentation Intended audienceDocument conventions Text symbolsEquipment symbols Rack stability HP installation and configuration assistanceGetting help HP storage web site HP technical supportHP authorized reseller About this Guide Introduction1 Switch chassis featuresInput Power LED green Power supplySerial port Chassis LEDsEthernet port System Fault LED solid amberHeartbeat LED green Resetting the switch Maintenance buttonPlacing the switch in maintenance mode Exiting maintenance modePort Logged-in LED green Fibre Channel ports and LEDsPort Activity LED green Port types SFP transceiversSwitch Manager user interface Switch managementCommand Line Interface File Transfer ProtocolIntroduction Planning Devices Device accessSoft zones Hard zones Access Control ListsDistance PerformanceBandwidth LatencyFabric management Fabric securityUser account security Simple Network Management Protocol securityPlanning Site requirements InstallingUnpack the switch and verify carton contents Installing and initially configuring the switchUsing the rack template Mount the switchAttaching the right rail to the rack rear view Attaching the mounting adapter brackets to the switch Placing the switch on the rails rear view Installing Installing an SFP transceiver Install SFP transceiversConnect power to the switch Connect Fibre Channel devices to the switchConnect the cables Installing Switch Manager on Windows systems Configure the switchInstalling Switch Manager on Linux systems Powering down the switch Backing up the switch configurationUsing Switch Manager to install firmware Updating switch firmwareUsing the CLI to install firmware Enter the password for your account name Installing Troubleshooting4 Heartbeat LED blink patterns Post diagnosticsConfiguration file system error blink pattern System error blink patternInternal firmware failure blink pattern Logged-In LED indications Over temperature blink patternPort Error blinking pattern Input Power LED is extinguished Chassis diagnosticsSystem Fault LED is illuminated Maintenance mode options Maintenance menu Image Unpack Maintenance menu ExitMaintenance menu Copy Log Files Maintenance menu Reset Switch Maintenance menu Remake FilesystemMaintenance menu Set Active Image Maintenance menu Update Boot LoaderTroubleshooting Class a equipment Federal Communications Commission NoticeClass B equipment Cables ModificationsEuropean Union Notice Canadian Notice Avis CanadienBsmi Notice Japanese Notice Japanese Power Cord NoticeKorean notices Laser compliance Battery replacement notice Grounding methods Prevention methodsElectrostatic Discharge Fabric specifications SpecificationsMaintainability Electrical DimensionsEnvironmental Regulatory certifications Management system requirements Management System RequirementsIndirect Ethernet cable Cable pin configurationsDirect Ethernet cross-over cable Serial cableEthernet connection information Establishing an Ethernet or serial connectionFor Windows environments Serial connection informationIndex Index Index Worldwide name Name server