HP RA7000 manual Creating the RAID StorageSet Configuration

Page 30

RA7000 / ESA10000 High Availability Solution Kit for HP-UX

3.3Creating the RAID StorageSet Configuration

Reference the Getting Started – HSZ70 Solutions Software V7.1 for HP-UX, Chapters 6 or 7 and Appendices A and B, to plan and create your RAID (storageset) configuration.

3.4Installing and Configuring HP MC/ServiceGuard Cluster Software

HP MC/ServiceGuard cluster software must be installed and configured on all host servers that share the RAID subsystem.

CAUTION

If a server is connected to a cluster, but is not configured with MC/ServiceGuard software, undesirable conditions could result.

Reference the (HP) Managing MC/ServiceGuard manual to install and configure MC/ServiceGuard cluster software on all (primary and secondary) HP host servers that comprise your cluster.

NOTES

When you are using MC/ServiceGuard and assigning the MAX_CONFIGURED_PACKAGES, allow an extra package assignment for the SWCC agent.

For a cluster containing more than two servers, The \.rhosts file must contain the “hostname root” or “IPaddress root” of all servers in the MC/ServiceGuard cluster, not just the two servers connected to the RAID subsystem.

3–2	EK–HAHPU– MH. B01

Image 30

Contents RA7000 / ESA10000 High Availability Solution Kit for HP-UX 1st Edition, July Contents Cabling and Termination Required to Expand a Cluster Software Setup Requirements for a ClusterDe-Installing the StorageWorks Command Console Agent TablesRevision Record Revision Level Date Summary of ChangesPage About This Guide RAID High Availability Cluster ConceptDefining a Clustered Host Server AudienceDocument Structure Appendix B De-Installing the Swcc Failover Transition Module Cabling the RAID Subsystem Cluster ComponentsAssociated Documents Digital StorageWorks Document Title Order NumberConventions Style Conventions MeaningWho to contact in Europe Who to contact in Asia PacificVisit our Web Site for the Latest Information RoadMap Getting StartedPage Pre-Installation Steps Verify RAID RA7000/ESA10000 for HP-UX Cluster RequirementsInventory the RAID Scsi Connection Kit RAID Scsi Connection Kit Contents listed by kit number Perform a System Backup Plan the Basic Cluster Layout Scsi Bus InterconnectSHR-1021Mid-Bus RAID Prepare the Scsi Host Adapters Set Unique Scsi Host Adapter IDsScsi Host Adapter Resistor Pack Removal Scsi Host Adapter Model A28696A Scsi Host Adapter Model A4107A Page Connecting RAID Subsystem Components through the Scsi Bus Cabling the RAID Subsystem Cluster ComponentsMid-Bus RAID Cluster Layout Scsi Bus Interconnect RA7000 or E SA10000 HO ST AHO ST B SubsystemHUB-Radiant RAID Cluster Layout Scsi Interconnect Host BEnd-Bus RAID Cluster Layout Scsi Bus Interconnect OST a HO ST BSoftware Setup Requirements for a Cluster Installing the StorageWorks CC RAID Manager SoftwareSoftware Requirements Summary Creating the RAID StorageSet Configuration # tar xvf /tmp/hastmhp01.tar # /tmp/hainstallhp.sh Hardware Configuration of an Expanded Cluster Cabling and Termination Required to Expand a ClusterAdding Host Servers to an Existing Cluster DescriptionFigure A-2 Adding Host Servers to an Existing Cluster Adding a Second RAID Subsystem to an Existing Cluster De-Installing the StorageWorks Command Console Agent StorageWorks CC Agent De-Installation ProceduresPage Reader’s Comments EK-HAHPU-MH. B01