HP RA7000 manual Revision Record, Revision Level Date Summary of Changes

Page 5

Revision Record

This Revision Record provides a concise publication history of this manual. It lists the manual revision levels, release dates, and reasons for the revisions.

The following revision history lists all revisions of this publication and their effective dates. The publication part number is included in the Revision Level column, with the last entry denoting the latest revision.

This publication supports the StorageWorks RA7000 / ESA10000 Subsystem configured with or without a SCSI hub interconnect to two Hewlett Packard host servers running the HP-UX (Version 10.20 or later) operating system. The SCSI host adapters supported are HP models A28696A, A2969A and A4107A (all High Density 68-Pin compatible). Hewlett Packard MC/ServiceGuard (Version 10.10 or later) is the cluster software supported by this publication.

Revision Level		Date	Summary of Changes
EK–HAHPU–	MH. A01	July 1998	Original release.
EK–HAHPU–	MH. B01	September 1998	Second release.

EK–HAHPU– MH. B01

v

Image 5

Contents RA7000 / ESA10000 High Availability Solution Kit for HP-UX 1st Edition, July Contents De-Installing the StorageWorks Command Console Agent Software Setup Requirements for a ClusterCabling and Termination Required to Expand a Cluster TablesRevision Level Date Summary of Changes Revision RecordPage RAID High Availability Cluster Concept About This GuideDocument Structure Defining a Clustered Host ServerAudience Cabling the RAID Subsystem Cluster Components Appendix B De-Installing the Swcc Failover Transition ModuleDigital StorageWorks Document Title Order Number Associated DocumentsStyle Conventions Meaning ConventionsVisit our Web Site for the Latest Information Who to contact in EuropeWho to contact in Asia Pacific Getting Started RoadMapPage Verify RAID RA7000/ESA10000 for HP-UX Cluster Requirements Pre-Installation StepsInventory the RAID Scsi Connection Kit RAID Scsi Connection Kit Contents listed by kit number Plan the Basic Cluster Layout Scsi Bus Interconnect Perform a System BackupSHR-1021Mid-Bus RAID Set Unique Scsi Host Adapter IDs Prepare the Scsi Host AdaptersScsi Host Adapter Resistor Pack Removal Scsi Host Adapter Model A28696A Scsi Host Adapter Model A4107A Page Cabling the RAID Subsystem Cluster Components Connecting RAID Subsystem Components through the Scsi BusRA7000 or E SA10000 HO ST AHO ST B Subsystem Mid-Bus RAID Cluster Layout Scsi Bus InterconnectHost B HUB-Radiant RAID Cluster Layout Scsi InterconnectOST a HO ST B End-Bus RAID Cluster Layout Scsi Bus InterconnectSoftware Requirements Summary Software Setup Requirements for a ClusterInstalling the StorageWorks CC RAID Manager Software Creating the RAID StorageSet Configuration # tar xvf /tmp/hastmhp01.tar # /tmp/hainstallhp.sh Cabling and Termination Required to Expand a Cluster Hardware Configuration of an Expanded ClusterDescription Adding Host Servers to an Existing ClusterFigure A-2 Adding Host Servers to an Existing Cluster Adding a Second RAID Subsystem to an Existing Cluster StorageWorks CC Agent De-Installation Procedures De-Installing the StorageWorks Command Console AgentPage EK-HAHPU-MH. B01 Reader’s Comments