Operation
Listing Hotkey Settings
1.Invoke HSM as described in the “Invoking HSM” section in this chapter.
2.Press the F4 key.
3.Open a text editor or word processor, and use the Paste function to display the settings.
USB Reset
If the USB peripherals lose focus and must be reset:
1.Invoke HSM as described in the “Invoking HSM” section in this chapter.
2.Press the F5 key.
Hotkey Beeper Control
The beeper can be toggled on and off. To toggle the beeper:
1.Invoke HSM as described in the “Invoking HSM” section in this chapter.
2.Press the B key.
The beeper toggles on or off. The command line displays Beeper On or Beeper Off for 1 second, then the message disappears and you automatically exit Hotkey mode.
Disabling Port Switching Keys
1.Invoke HSM as described in the “Invoking HSM” section in this chapter.
2.Press the X key.
3.Press the Enter key.
NOTE: This procedure is a toggle. To enable the port switching keys, repeat steps 1 and 2.
Restoring Default Settings
To reset the switch to the default hotkey settings:
1.Invoke HSM as described in the “Invoking HSM” section in this chapter.
2.Press the R key.
3.Press the Enter key.
All hotkey settings return to the factory default settings.
HP 1x4 USB/PS2 KVM Switch User Guide |