Operation
Auto Scanning
The Auto Scan feature automatically cycles the KVM focus through the computer ports at regular intervals. This feature enables you to monitor the computer activity without having to switch from port to port manually.
Table 3-3: Auto Scanning
Hotkey | Action | |
Scroll Lock A Enter | Starts Auto Scan. The KVM focus cycles from port to port at | |
Scroll Lock | ||
| ||
|
|
|
| A n Enter | Starts Auto Scan. The KVM focus cycles from port to port at |
|
| |
|
|
|
To exit Auto Scan mode, press the ESC key or the spacebar.
Hotkey Setting Mode
Hotkey Setting Mode (HSM) is used to set up the switch configuration. All operations begin with invoking HSM.
Invoking HSM
1.Press and hold the Num Lock key.
2.Press the minus key.
NOTE: If the minus key is not released within 0.5 second, hotkey invocation is canceled.
3. Release the Num Lock key.
Ordinary keyboard and mouse functions are suspended, and only hotkey compliant keystrokes and mouse clicks described in this chapter can be input.
When HSM is active, the Caps Lock and Scroll Lock LEDs flash in succession to indicate that HSM is in effect. The LEDs stop flashing and revert to normal status upon exiting HSM.
At the conclusion of some hotkey operations, you automatically exit Hotkey mode. With some operations, you must exit manually. To exit HSM manually, press the Esc key or the Spacebar.
HP 1x4 USB/PS2 KVM Switch User Guide |