HP File System Extender (FSE) Fsemedium -format work35 -F -init, Fsemedium -i workoffline45 -force

2.9 NAME 64

•Show status of all medium volumes on the FSE medium with barcode archive_tape_ABB:

fsemedium –larchive_tape_ABB –V

•Format the FSE medium with barcode work_34; disable monitoring: fsemedium –fwork_34 – –no–monitor

•Format the FSE medium with barcode work_35 in FORCED mode and ini- tialize all FSE medium volumes on it:

fsemedium – –format work_35 –F – –init

•Initialize all medium volumes on FSE medium with barcode work_offline_-

45 in FORCED mode:

fsemedium –i work_offline_45 – –force

•Initialize volume number 1 on the FSE medium with barcode tape_4a; dis- able monitoring:

fsemedium – –init tape_4a – –volume 1 – –no–monitor

• Disallow further writing to the FSE medium with barcode old_tape_23:

fsemedium – –mark–unreliable old_tape_23

•Pull the FSE medium with barcode dailyFiles_A out of the operation; skip confirmation:

fsemedium – –mark–unusable dailyFiles_A – –force

•Make the FSE medium with barcode dailyFiles_B fully available for writing and reading:

fsemedium – –mark–good dailyFiles_B

•Mark erroneous volume number 3 on the FSE medium with barcode ait_60 as FULL and populate the volume and the medium’s system volume with Fast Recovery Information:

fsemedium – –close–volume ait_60 3

•Recreate Fast Recovery Information for data volumes 1, 2 and 4 on FSE medium with barcode weeklyFiles01; disable monitoring:

fsemedium – –recreate–fri weeklyFiles01 –V 1 2 4 – –no–monitor

File System Extender 3.2 Command Line Reference