HP File System Extender (FSE) manual Add, Pool

2.9 NAME 56

JOB PROGRESS MONITORING fsemedium is able to receive messages from Management Interface to give the user ability to monitor the progress of the command.

Monitoring is enabled by default and can be disabled by using the – –no–monitoroption.

When monitoring is enabled, fsemedium command reports events and other rel- evant information from the FSE processes as long as the job that fsemedium has started is running. After the job terminates, the command exits. If monitoring is disabled, the command returns the control immediately after it has started a cor- responding job. In this case no information from the job is received, even in case of errors.

Monitoring can be canceled by pressing ∧C in the shell where fsemedium runs.

Note:

The job will continue to run and will write progress to fse.log file.

2.9.3OPTIONS

•–a ,– –add

Add a new FSE medium with barcode Barcode to the FSE configuration. If additional option – –poolwith the argument PoolName is given, assign this FSE medium to the specified FSE media pool. If this option is not given, the medium entry is added to the Resource Management Database but the medium itself is left unassigned with its configurable parameters unset.

Note:

FSE medium must be assigned to some FSE media pool, before it can be used.

•Barcode

The identifier of the FSE medium that is being managed. Most often a numerical barcode. In case of disk medium barcode is the relative part of the mount point (for example: dm_001, dm_002).

•–O ,– –pool

Assign a new FSE medium with barcode Barcode to the FSE media pool PoolName. This option may only be used together with the – –addoption.

File System Extender 3.2 Command Line Reference