HP File System Extender (FSE) manual Fsepartition -enableclient01temporarystore

2.10 NAME 75

•Enable the currently disabled FSE partition named client_01_temporary_- store:

fsepartition – –enableclient_01_temporary_store

•Run the reorganizational scan job on the FSE partition named temporary_- part; treat all migrated data generations created after noon of 15th july 2004 as important:

fsepartition – –reorg–scantemporary_part "2004/07/15 12:00:00"

•Run the reorganizational scan job on the FSE partition named very_- temporary_part; treat at most 15 latest migrated data generations created after 10:00 AM of 20th september 2003 as important:

fsepartition – –reorg–scanvery_temporary_part "2003/09/20 10:00:00" 15

•Display the reorganizational statistics gathered by the reorganizational scan job for the FSE partition named client_03_astro_pics; omit reporting the FSE media with FSE slack space percentage lower than 70%:

fsepartition – –reorg–stat client_03_astro_pics 70

2.10.5FILES

•/opt/fse/newconfig/fse–partition.cfg (on Linux systems), %InstallPath%\newconfig \fse–partiton.cfg (on Windows systems) Template for an FSE partition configuration file.

• /opt/fse/newconfig/fse–partition–CLI–DISK.cfg (on Linux systems),

%InstallPath%\newconfig \fse–partiton–CLI–DISK.cfg (on Windows sys- tems)

Template for an FSE partition configuration file, with the parameters pre- set so that the partition policies are more suitable for usage with FSE disk media.

• /opt/fse/newconfig/fse–partition–NEVER–RELEASE.cfg	(on Linux sys-
tems),

File System Extender 3.2 Command Line Reference