TROUBLE SHOOTING | TECHNICAL SPECIFICATIONS | |||
NO SOUND | Transmission Mode | : | UHF | |
| ||||
- Ensure the AC/DC adaptor is fully inserted into the AC outlet and the |
|
| ||
power connection input on the transmitter. | Carrier Frequency | : | 900 MHz Digital Hybrid | |
Operation Voltage | : | Transmitter, DC 12V 150mA | ||
- Ensure the speakers are switch ON. | ||||
|
| Speakers, 6 X ‘C’ size Alkaline batteries or DC | ||
- Speaker’s battery capacity is too low, replace | with new batteries or |
| ||
| 9V 1A adaptor | |||
connect the AC/DC adaptors to the speakers. |
|
| ||
|
| Remote Control Unit, 2 X ‘AAA’ size batteries | ||
- Ensure the TV or audio component is ON. |
|
| ||
Frequency Response | : | 40Hz – 12KHz | ||
| ||||
- The connected audio / video equipment is not playing. Start playing the |
|
| ||
equipment. | Distortion | : | 1% | |
S/N Ratio | : | 65dB (typical) | ||
| ||||
- The volume of speakers is too low, adjust the volume to an appropriate |
|
| ||
level. | Operation Distance | : | Up to 150 feet | |
Speakers | : | |||
| ||||
DISTORTED | Output Power | : | 2 x 5Watts |
-Press the
-Change the position of the channel selector on the transmitter. You must then press the “AUTO TUNE” button on the speakers.
-Battery capacity is too low. Replace with the new battery.
-Ensure the volume level of speakers is adjusted properly.
-The speakers are too far away from the transmitter, move it closer.
-The input level of the audio signal is too low. Turn up the volume of the audio source equipment.
P.8 | P.9 |