Configuring Windows NT/2000 for Printing
Complete the following steps to set up your Windows NT/2000 system for printing to an HP JetDirect print server. Before you start this procedure, make sure you have access to the following items:
●The Windows NT/2000 installation
●The printer driver for your printer.
●The HP JetDirect Port, which is installed when you install the HP JetAdmin software (version 3.3 and above).
Windows NT 3.51
1.
2.Click Printer in the menu bar, then click Create Printer.
3.Type a printer name.
4.Select the printer driver for your printer.
5.If desired, type a description of the printer (for example, bldgC_5Si).
6.Choose Other in the Print To: box. The Print Destinations dialog box appears.
7.Click HP JetDirect Port, then click OK to display the Add HP JetDirect Port Wizard.
8.Select the device you want as follows:
■If you want to specify the device, type the hardware address, TCP/IP address (if configured), or network printer name and click Next.
-or -
■If you want to choose a device from a list of printers, click TCP/IP or IPX/SPX, click Search, select the printer from the list, click OK, then click Next.