6.Before the software shuts down the spooler to make configuration changes, it prompts you for confirmation. Press [Enter] for the HP JetAdmin software to shut down the spooler.
7.At the prompt, press [Enter] to display the configuration menu.
The printer should now be configured in your
Modifying the Existing Network Print Queue from the Local Spooler
You can modify the existing network spool queue using the HP JetAdmin software.
1.Run the HP JetAdmin software. Type:
/opt/hpnp/bin/jetadmin
2.Select Configuration from the Main menu. The HP JetAdmin for UNIX Configuration menu appears.
3.Select Modify existing spooler queue(s) from the software’s configuration menu.
4.Type the name of the queue you want to modify.
5.When the HP JetAdmin software displays a list of configurable parameters, change the parameters you want to change, then select 0 (zero).
CAUTION In the Solaris environment, do not use Print Manager to modify any queue created by the HP JetAdmin software. Using Print Manager makes all network queues configured by the HP JetAdmin software unusable.
68 UNIX
EN