HP AR 18 Router manual Upgrading Application Programs with NET

Page 58

Installation Manual	Chapter 3 Starting and Maintaining
H3C AR 18-2X Series Routers	the Router

successfully.

[ftp] get bootromfull

4)Execute the following command on the router to upgrade

Boot ROM.

<H3C> system-view

[H3C] upgrade bootrom full

WARNING: This operation will update the Boot ROM. It may result in booting failure.

Caution!!! upgrade bootrom [Y/N]?y

Please wait, it may take a long time

The upgrade succeeds!

5)After the upgrade operation is complete, restart the router so that the upgrade made to the Boot ROM takes effect. After the router is restarted, you can use the display version command to display the current Boot ROM version, or directly enter the Boot ROM menu, so as to verify the upgrade operation.

3.2.6Upgrading Application Programs with NET

Upgrading an application program with net is to download the application program through an Ethernet interface. In this approach, the router is a client that needs to be connected to a TFTP or FTP server through one of its fixed Ethernet interfaces.

3-25

Image 58

Contents H3C AR 18-2X Series Routers Installation Manual Technical Support Manual Content About This ManualChapter Contents OrganizationConventions Convention Description BoldfaceII. GUI conventions Convention DescriptionTable of Contents Product Overview IntroductionHardware Features of the AR Hardware Features of the ARAppearance II. System specifications SdramIV. Interface attributes III. LEDsAttribute Description Attribute 10/100BASE-T3Front view of the AR II. System specifications LAN1/LAN2/L Hardware Features of the AR 18-22-8/18-22S-8 5Front view of the AR 18-22-8/18-22S-8AR 18-22S-8 LAN1/LAN Hardware Features of the AR 18-23-1/18-23S-1 7Front view of the AR 18-23-1/18-23S-1AR 18-23S-1 ETH0 LINK/ACT Connecting the Router to a Console Terminal Installing the Router Safety PrecautionsInstalling the Router Placing the Router on a Tabletop/WorkbenchMounting the Router on a Vertical Surface Installing the Router in a Rack Connecting the Ground Wire 2AR 18-2X installation in a rackAC-input power supply Connecting the Power CordII. Connecting the AC-input power cord II. Connecting the console cable Connecting the Router to a Console TerminalConsole cable Connecting the Router to LAN Ethernet cableVerifying Installation II. Connecting an Ethernet cableInstallation Manual Starting up the Router II. Setting terminal parameters Setting up a Configuration EnvironmentConnecting the router to a console terminal Starting up the RouterInstallation Manual Installation Manual Installation Manual Powering on the Router 5Setting the terminal typeBoot Menu 8 MB Flash Is Installed Maintaining the RouterPlease input Boot Rom password = clear field Installation Manual Boot Menu 16 MB Flash Is Installed Installation Manual Boot file File name File type =MAIN B=BACKUP S=SECURE Set this file as Main Backup Exit Enter your choice1-3 Installation Manual Upgrading Programs through XModem Upgrading an application programDownloading ... Ccccc Installation Manual II. Upgrading the Boot Rom program III. Upgrading the extended segment of the Boot ROM programWriting to FLASH.Please wait...#### Upgrading Boot ROM at CLI Upgrading Boot ROM Through TftpH3C tftp 1.1.1.1 get bootromfull II. Upgrading Boot ROM Through FTP Installation Manual Upgrading Application Programs with NET Installation Manual Host inet h Press Enter as prompted to have the router reboot Troubleshooting Symptoms Troubleshooting the Power SystemTroubleshooting the Configuration System SolutionSymptoms Recovering/Replacing a Lost Boot Rom Password

Related manuals

Manual 3 pages 18.26 Kb