HP AR 18 Router manual Boot Menu 16 MB Flash Is Installed

Page 43

Installation Manual

Chapter 3 Starting and Maintaining

H3C AR 18-2X Series Routers

the Router

3:Restore Extended Segment of Boot Rom from FLASH

4:Backup Extended Segment of Boot Rom to FLASH

5:Exit to Main Menu

Enter your choice(1-5):

The menu provides approaches to Boot Rom upgrade, backup, and recovery. See the sections “3.2.3 Upgrading Programs through XModem” and “3.2.4 Backing up and Restoring the Extended Segment of the Boot Rom Program” for the procedures.

6)Have the system ignore the software version of the Boot Rom program, its extended segment, and application program for backward compatibility. If you fail to upgrade the software because the system considers that you are using an “invalid version” even when the correct version is used, you can use this option to ignore the version check during software upgrading. Note that this option works only once after you select it. Then, the system resumes version check at reboot.

7)Exit and reboot the router.

3.2.2Boot Menu (16 MB Flash Is Installed)

The AR 18-22S-8/AR 18-23S-1 has a 16MB flash.

Start the router. When the information “Press Ctrl-B to enter Boot Menu” appears on the terminal screen, press <Ctrl+B>. The system displays:

Please input Boot Rom password :

3-10

Image 43
Contents H3C AR 18-2X Series Routers Installation Manual Technical Support About This Manual Manual ContentOrganization Chapter ContentsConvention Description Boldface ConventionsConvention Description II. GUI conventionsTable of Contents Introduction Product OverviewHardware Features of the AR Hardware Features of the ARAppearance Sdram II. System specificationsIV. Interface attributes III. LEDsAttribute Description 10/100BASE-T Attribute3Front view of the AR II. System specifications LAN1/LAN2/L 5Front view of the AR 18-22-8/18-22S-8 Hardware Features of the AR 18-22-8/18-22S-8AR 18-22S-8 LAN1/LAN 7Front view of the AR 18-23-1/18-23S-1 Hardware Features of the AR 18-23-1/18-23S-1AR 18-23S-1 ETH0 LINK/ACT Connecting the Router to a Console Terminal Safety Precautions Installing the RouterPlacing the Router on a Tabletop/Workbench Installing the RouterMounting the Router on a Vertical Surface Installing the Router in a Rack 2AR 18-2X installation in a rack Connecting the Ground WireAC-input power supply Connecting the Power CordII. Connecting the AC-input power cord II. Connecting the console cable Connecting the Router to a Console TerminalConsole cable Ethernet cable Connecting the Router to LANII. Connecting an Ethernet cable Verifying InstallationInstallation Manual Starting up the Router Starting up the Router Setting up a Configuration EnvironmentConnecting the router to a console terminal II. Setting terminal parametersInstallation Manual Installation Manual Installation Manual 5Setting the terminal type Powering on the RouterMaintaining the Router Boot Menu 8 MB Flash Is InstalledPlease input Boot Rom password = clear field Installation Manual Boot Menu 16 MB Flash Is Installed Installation Manual Boot file File name File type =MAIN B=BACKUP S=SECURE Set this file as Main Backup Exit Enter your choice1-3 Installation Manual Upgrading an application program Upgrading Programs through XModemDownloading ... Ccccc Installation Manual III. Upgrading the extended segment of the Boot ROM program II. Upgrading the Boot Rom programWriting to FLASH.Please wait...#### Upgrading Boot ROM Through Tftp Upgrading Boot ROM at CLIH3C tftp 1.1.1.1 get bootromfull II. Upgrading Boot ROM Through FTP Installation Manual Upgrading Application Programs with NET Installation Manual Host inet h Press Enter as prompted to have the router reboot Troubleshooting Solution Troubleshooting the Power SystemTroubleshooting the Configuration System SymptomsSymptoms Recovering/Replacing a Lost Boot Rom Password
Related manuals
Manual 3 pages 18.26 Kb