HP AR 18 Router manual Hardware Features of the AR, Appearance

Page 9

Installation Manual

Chapter 1 Product Overview

H3C AR 18-2X Series Routers

1.2 Hardware Features of the AR 18-2X

1.2.1Hardware Features of the AR 18-21

I.Appearance

1) Ethernet LED LAN4

2) Ethernet LED LAN3

3) Ethernet LED LAN2

4) Ethernet LED LAN1

5) WAN LED (WAN0)

6) SYSTEM LED (SYS)

7) POWER LED (PWR)

 

Figure 1-1Front view of the AR 18-21

1) Power switch

3)Console port (CONSOLE)

5)Ethernet interface 2(LAN2)

7)Ethernet interface 4 (LAN4)

9)WAN interface (WAN0)

2) Power socket

4)Ethernet interface 1 (LAN1)

6)Ethernet interface 3 (LAN3)

8)Grounding screw

Figure 1-2Rear view of the AR 18-21

1-2

Image 9
Contents H3C AR 18-2X Series Routers Installation Manual Technical Support About This Manual Manual ContentOrganization Chapter ContentsConvention Description Boldface ConventionsConvention Description II. GUI conventionsTable of Contents Introduction Product OverviewHardware Features of the AR Hardware Features of the ARAppearance Sdram II. System specificationsIII. LEDs IV. Interface attributesAttribute Description 10/100BASE-T Attribute3Front view of the AR II. System specifications LAN1/LAN2/L 5Front view of the AR 18-22-8/18-22S-8 Hardware Features of the AR 18-22-8/18-22S-8AR 18-22S-8 LAN1/LAN 7Front view of the AR 18-23-1/18-23S-1 Hardware Features of the AR 18-23-1/18-23S-1AR 18-23S-1 ETH0 LINK/ACT Connecting the Router to a Console Terminal Safety Precautions Installing the RouterPlacing the Router on a Tabletop/Workbench Installing the RouterMounting the Router on a Vertical Surface Installing the Router in a Rack 2AR 18-2X installation in a rack Connecting the Ground WireConnecting the Power Cord AC-input power supplyII. Connecting the AC-input power cord Connecting the Router to a Console Terminal II. Connecting the console cableConsole cable Ethernet cable Connecting the Router to LANII. Connecting an Ethernet cable Verifying InstallationInstallation Manual Starting up the Router Connecting the router to a console terminal Setting up a Configuration EnvironmentII. Setting terminal parameters Starting up the RouterInstallation Manual Installation Manual Installation Manual 5Setting the terminal type Powering on the RouterMaintaining the Router Boot Menu 8 MB Flash Is InstalledPlease input Boot Rom password = clear field Installation Manual Boot Menu 16 MB Flash Is Installed Installation Manual Boot file File name File type =MAIN B=BACKUP S=SECURE Set this file as Main Backup Exit Enter your choice1-3 Installation Manual Upgrading an application program Upgrading Programs through XModemDownloading ... Ccccc Installation Manual III. Upgrading the extended segment of the Boot ROM program II. Upgrading the Boot Rom programWriting to FLASH.Please wait...#### Upgrading Boot ROM Through Tftp Upgrading Boot ROM at CLIH3C tftp 1.1.1.1 get bootromfull II. Upgrading Boot ROM Through FTP Installation Manual Upgrading Application Programs with NET Installation Manual Host inet h Press Enter as prompted to have the router reboot Troubleshooting Troubleshooting the Configuration System Troubleshooting the Power SystemSymptoms SolutionSymptoms Recovering/Replacing a Lost Boot Rom Password
Related manuals
Manual 3 pages 18.26 Kb