Plantronics W730 manual Headset Features, Headset Controls, Volume up/Flash button, Call button

Page 15

Headset Features

Headset Controls

Now that you’ve assembled your headset, installed the software and

 

connected your phones, read this section to learn about the headset

 

features, how to use the controls and more.

1Volume up/Flash button

Increase the volume Press the volume button up +

Flash between calls During a call, long press the volume button up + for 1.5 seconds

2Volume down/Mute button

Decrease the volume

Press the volume button down –

Mute/unmute a call

To mute/unmute the headset, press the volume button down – for 1.5

 

seconds

3Call button

Place, answer, end a call Press the call control button

4Headset LED Flashes white when in use

5Microphone

CAUTION For your safety, do not use headset at high volumes for extended periods of time. Doing so can cause hearing loss. Always listen at moderate levels. For more information on headsets and hearing visit plantronics.com/healthandsafety.

Headset Power If the headset battery is installed and charged, the headset is automatically on. The headset does not have an on/off button. If you won’t be using the headset for a long period of time and the headset will not be in the charging cradle, place the headset in sleep mode.

Place the Headset in Sleep Mode

Placing the headset in sleep mode with a fully charged battery will provide up to 50 hours of standby time.

1While the headset is idle, press the call button for three seconds until you see the headset flash white twice. .

2To wake the headset, press the call button again until you see two white flashes or hear three high tones.

15

Image 15
Contents Savi W730 Contents Page Display WelcomeSystem Requirements ComputerWhats in the Box HeadsetEartips USB cable Telephone interface cable Base Volume up buttonVolume down button Microphone Call control button Base and Headset BasicsAccessories Customize Your Headset Page Charge Your Headset Desk phone standard SetupDesk Phone Connect and Call Choose Desk PhonePage Mobile Connect and Call Connect Your Computer 1 Connect the USB cable Computer Connect and CallHeadset Controls Headset FeaturesVolume up/Flash button Volume down/Mute buttonMute your Headset During a Call Adjust Your Headset Volume Headset Battery LevelFor Windows XP systems Out of Range WarningTones For Windows Vista and Windows 7 systemsBase Features Base ButtonsBase Subscription Button Set the Range Bluetooth Pairing ButtonPage Incoming Calls Daily UsePlace a Softphone Call Place a mobile phone callHeadset Audio Additional HeadsetsMulti-Phone Status Mobile PhonePage Plantronics Control panel Install PlantronicsAdvanced Use SoftwareSet the Range Device Settings Base TabFeature Settings Default Default LineAudio Bandwidth for Desk phone and PC Bluetooth EnabledStop Auto Connect to Mobile When Headset Is Docked Initiate Mobile Voice CommandsTab Device Settings HeadsetAuto Answer Launch Audio Devices Control Panel Device SettingsSecurity Tab Action to Media PlayerMaintain Headset to PC Link Audio Sensing EnabledCheck for Updates Automatically Ring Both Headset and PCInstall Checked Updates Check for Updates NowHeadset TroubleshootingSoftphone Desk Phone MobileNo audio connection to PC Need More HELP?