Plantronics W730 manual Headset Battery Level

Page 16

Headset Battery Level

Mute your Headset During a Call

Adjust Your Headset Volume

Battery Storage Time

If you remove a fully charged battery from the headset, it will provide up to 75 days of battery storage time, stored under normal conditions.

Talk Time

With a single full charge, the headset will provide up to 6 hours of continual talk time. Talk time will be reduced when operating in wideband mode and/or if the headset is used consistently at a long distance from the base.

Low Battery Warning

If you are on a call and the headset battery is critically low, you will hear a repeated single low tone every 15 seconds indicating that the battery is low. You should recharge the headset immediately or swap out the low battery with a fully-charged battery.

If you are not on a call and press the call button, you will hear three low tones if the battery is critically low. You should recharge the headset immediately or swap out the low battery with a fully-charged battery.

Headset Battery Status

There are two ways to determine your headset battery status.

View System Tray Icon

With Plantronics software installed, a headset icon will appear in your system tray, displaying battery status. A warning will be issued if your headset’s battery is critically low.

Use the Base

When the system is idle, short press the base subscription button once to get feedback on the headset battery level. The computer, mobile and desk phone button LEDs will light up, indicating your headset battery level.

Headset Battery

Computer Button

Mobile Button LED

Desk Phone Button

Level

LED on base

on base

LED on base

 

 

 

 

75–100%

50–75%

25–50%

0–25%

To mute/unmute a call, press the volume down button for at least 1.5 seconds.

When mute is activated, the base button will be solid red and you will hear three high tones (you will still be able to hear the caller). These tones will repeat every 60 seconds while mute is active. When unmuted, you will hear three low tones.

Fine-tune your headset volume by pressing the volume up button (increase)or volume down button(decrease).

16

Image 16
Contents Savi W730 Contents Page Welcome System RequirementsComputer DisplayHeadset Whats in the BoxEartips USB cable Telephone interface cable Volume up button Volume down button Microphone Call control buttonBase and Headset Basics BaseAccessories Customize Your Headset Page Charge Your Headset Setup Desk Phone Connect and CallChoose Desk Phone Desk phone standardPage Mobile Connect and Call Computer Connect and Call Connect Your Computer 1 Connect the USB cableHeadset Features Volume up/Flash buttonVolume down/Mute button Headset ControlsHeadset Battery Level Mute your Headset During a Call Adjust Your Headset VolumeOut of Range Warning TonesFor Windows Vista and Windows 7 systems For Windows XP systemsBase Buttons Base FeaturesBase Subscription Button Bluetooth Pairing Button Set the RangePage Daily Use Incoming CallsPlace a mobile phone call Place a Softphone CallAdditional Headsets Multi-Phone StatusMobile Phone Headset AudioPage Install Plantronics Advanced UseSoftware Plantronics Control panelDevice Settings Base Tab Feature Settings DefaultDefault Line Set the RangeBluetooth Enabled Stop Auto Connect to Mobile When Headset Is DockedInitiate Mobile Voice Commands Audio Bandwidth for Desk phone and PCDevice Settings Headset TabAuto Answer Device Settings Security TabAction to Media Player Launch Audio Devices Control PanelAudio Sensing Enabled Check for Updates AutomaticallyRing Both Headset and PC Maintain Headset to PC LinkCheck for Updates Now Install Checked UpdatesTroubleshooting HeadsetDesk Phone Mobile SoftphoneNo audio connection to PC Need More HELP?