Plantronics W730 manual Out of Range Warning, Tones, For Windows Vista and Windows 7 systems

Page 17

Make general volume adjustments for the desk phone with the base volume dials.

For computer volume adjustments, use your softphone application controls or your computer’s audio control panel (see below). Mobile phone volume can be adjusted on the mobile phone.

NOTE You can quickly access your system’s control panel by using the link in the Plantronics Control

Panel on the Preferences Tab.

For Windows Vista and Windows 7 systems

Adjust your overall volume by going to: Start Menu > Settings > Control Panel > Sound >

Playback. Click “OK” to confirm your change.

For Windows XP systems

Adjust your overall volume by going to: Start Menu > Settings > Control Panel > Sounds and

Audio Devices > Audio tab > Sound Playback. Click OK to confirm changes.

Turn On/Off Headset LED The headset LED will flash when you are on a call or the headset is in use. The LED can be turned off.

When you are not on a call, press the headset volume down button for three seconds until the headset flashes white twice to toggle the LED on or off.

Out of Range Warning

If you are on a call and go out of the operating range, you will hear three low tones. You will

Tones

hear a single mid tone when you are back in range.

 

If you stay out of range, active calls will be suspended. Calls will be re-established when you

 

walk back into range. If you remain out of range for more than 5 minutes, the system will drop

 

the call.

 

If you are not on a call and go out of the operating range and press the call button, you will

 

hear a single tone for the button press and three low tones for the failure to make a link.

 

 

 

17

Image 17
Contents Savi W730 Contents Page System Requirements WelcomeComputer DisplayEartips USB cable Telephone interface cable Whats in the BoxHeadset Volume down button Microphone Call control button Volume up buttonBase and Headset Basics BaseAccessories Customize Your Headset Page Charge Your Headset Desk Phone Connect and Call SetupChoose Desk Phone Desk phone standardPage Mobile Connect and Call Connect Your Computer 1 Connect the USB cable Computer Connect and CallVolume up/Flash button Headset FeaturesVolume down/Mute button Headset ControlsMute your Headset During a Call Adjust Your Headset Volume Headset Battery LevelTones Out of Range WarningFor Windows Vista and Windows 7 systems For Windows XP systemsBase Subscription Button Base FeaturesBase Buttons Set the Range Bluetooth Pairing ButtonPage Incoming Calls Daily UsePlace a Softphone Call Place a mobile phone callMulti-Phone Status Additional HeadsetsMobile Phone Headset AudioPage Advanced Use Install PlantronicsSoftware Plantronics Control panelFeature Settings Default Device Settings Base TabDefault Line Set the RangeStop Auto Connect to Mobile When Headset Is Docked Bluetooth EnabledInitiate Mobile Voice Commands Audio Bandwidth for Desk phone and PCTab Device Settings HeadsetAuto Answer Security Tab Device SettingsAction to Media Player Launch Audio Devices Control PanelCheck for Updates Automatically Audio Sensing EnabledRing Both Headset and PC Maintain Headset to PC LinkInstall Checked Updates Check for Updates NowHeadset TroubleshootingSoftphone Desk Phone MobileNo audio connection to PC Need More HELP?