Plantronics W730 manual Desk Phone Connect and Call, Setup, Choose Desk Phone, Desk phone standard

Desk Phone: Connect and Call

Choose Desk Phone	Choose a desk phone setup A, B or C and connect cables.
Setup	A Desk phone (standard)

USE

•Connect one end of the telephone interface cable to the back of the base

•Disconnect the handset coil cord from the base of the desk phone and re-connect it to the telephone interface cable junction box.

•Finally connect the remaining end of the telephone interface cable into the open handset port on the desk phone.

NOTE If your phone has a built-in headset port, you should only use the headset port if you will not be using the HL10 lifter. In this configuration, you must press both the headset button on your phone and the call control button on the headset to answer or end calls.

BDesk phone + HL10 lifter (sold separately)

See the user guide at plantronics.com/accessories for details.

USE

CDesk phone + EHS cable (sold separately)

See the user guide at plantronics.com/accessories for details.

USE

11