Soleus Air SG-WAC-25ESE-C Installation & Assembly Instructions Window Mounting, Remove Chassis

Page 7

INSTALLATION & ASSEMBLY INSTRUCTIONS - WINDOW MOUNTING

REMOVE CHASSIS

1.Pull down the front panel and remove the filter (FIG. 1 below)

2.Lift the front panel upwards to remove and place to the side.

FIG. 1

 

FIG. 2

 

 

 

3.Locate the four faceplate screws and remove. These screws will need to be re-installed prior to mounting the air con- ditioner (FIG. 2 above)

4.After removing the screws, gently pull away the faceplate from the air conditioner cabinet (FIG. 3 & 4).

FIG. 3

 

FIG. 4

 

 

 

5. Remove the two control panel screws from the front panel (FIG 5).

FIG. 5

7

Image 7
Contents Models SG-WAC-25ESE-C Important Safety Instructions Electrical Requirements Lcdi Power Cord and PlugRecommended Ground Method Tools Needed Parts ListDisclaimer SpecificationsModel Storm Window Requirements Installation & Assembly InstructionsPrior to Installing the Air Conditioner Window PreparationRemove Chassis Installation & Assembly Instructions Window MountingInstallation & Assembly Instructions Window Mounting Placing the Cabinet Inside the Window Assembly & InstallationTop Angle Rail and Side Bracket Installation TOP ViewMark Install Support BracketsInstall the Window Lock and Sash Seal Extend the Accordion PanelsPrepare the Wall THRU-THE-WALL InstallationInstalling the Chassis into the Cabinet Select the Wall LocationPrepare and Install the Cabinet Assembly & Installation THRU-THE-WALLSupport Bracket Wooden Strip Masonry ConstructionElectronic Control Panel & Remote Control Using Your AIR ConditionerAir Conditioner Controls Normal Operating Sounds Operating Your AIR Conditioner Remote ControlOperating Your AIR Conditioner Using Your AIR Conditioner Winter Storage Care and CleaningAir Filter Cleaning Cabinet CleaningProblem Possible Causes Solutions TroubleshootingWater is dripping inside the room Water is dripping outsideWater collects in the base pan One Year Limited Warranty Warranty