HP WP36/50 manual Installing DIMMs, Removing Dimm, Testing the Expansion Memory, DIMMs to be used

Page 102

Appendix A Option Units

4.Installing DIMMs

■DIMMs to be used

See your Kyocera Mita dealer for purchasing information of the DIMMs that are best suited for use with this printer. 32 MB, 64 MB, 128 MB and 256 MB DIMMs can be used for memory expansion.

Insert the DIMM into the socket as shown below.

1

Remove the DIMM from its package.

2

Open the clips on both ends of the DIMM socket.

3

Insert the DIMM into the socket, so that the notches

on the DIMM align with the corresponding protru-

 

sions in the socket.

Figure A-14

4

Close the clips of the DIMM socket to secure the

DIMM.

Figure A-15

5

When you finish installing the DIMM, reinsert the

main circuit board into the printer by reversing the

removal procedure.

4.1 Removing DIMM

To remove a DIMM, carefully pull the end clips outwards, then pull the DIMM out of the socket.

Return the main circuit board to the printer by reversing the procedure explained in Removing the Main Circuit Board from the Printer on page A-5.

Figure A-16

4.2 Testing the Expansion Memory

After you finish installing DIMMs in the printer, test the printer to see if the installation was successful. To test the ex- pansion memory, proceed as follows:

1

Make sure the printer is turned off. Plug the power

cord into the printer and turn the printer on.

2

Press the MENU key on the operator panel.

3

Press the

or

key repeatedly until Print

Status Page appears.

4

Press the ENTER key twice.

5

If the installation was successful, the amount of

memory shown on the status page will correspond

 

with the amount of expanded memory. (The factory installed memory size is 32 MB for FS-9120DN, 64 MB for FS-9520DN.)

A-6

Page 101 Page 103
Image 102
Page 101 Page 103
Contents Océ Operation Guide Symbols Regarding TrademarksLicense Limited WarrantyIBM program license agreement Limitation of RemediesIii Contents Appendix B Host Computer Interface Glossary Glossary-1 Index Index-1Introduction For More InformationGuide to the Operation Guide Important! Please read first Other Precautions Installation PrecautionsPower Supply/Grounding the Printer EnvironmentPrecautions for Use Page Chapter Names of Parts Cleaning brush Main switchCleaning knob Power cord connector Option unit connectorGeneral Guidelines Paper SpecificationsChapter Handling Paper Paper AvailabilitySelecting the Right Paper Moisture Content Paper GrainOther Paper Properties Adhesive-Backed Labels Special PaperTransparency Overhead Projection Film Paper type to be used Media type to be selectedPaper Type Metric specifications How to Load PaperInch specifications Loading Paper into the Paper CassetteLoading Paper into the MP Multi- Purpose Tray Setting Envelopes Using the Operator Panel Understanding the Operator PanelIndicator Description Operation IndicatorsInterface Indicator Message DisplayMessage Display Paper Size Paper Size IndicatorPaper Type Indicator Message Display Paper TypeParallel KeysKey Function NetworkUsing the Operator Panel Menu Selection SystemUSB On the next KIR Mode Off EcoPrint Mode Off EcoPrint Mode On Paper Handling Life Counters Others Total Print New Toner Installed Using the Menu Selection System Printing the Menu MapPrinting Status MPS ?Harold MPSQuick Copy Harold Quick Copy ?ArlenPrivate/Stored ?Arlen Private/Stored HaroldPrivate/Stored Arlen ?AgendaList Code JOB ? Agenda DeleteList Code JOB Cera Mita KM-Net Job ManagerPrint VMB Data Print VMB Data Tray001Print VMB Data Tray001Richard List of VMBTemp. Code JOB Size 0500MB MPS ConfigurationQuick Copy Maximum Space Assigned to Temporary Code Jobs050 Perm. Code JOB Size 0500MBPerm. Code JOB Size VMB Size 0500MBParallel I/F ?Nibble high Changing the Interface ParametersInterface ?Parallel Interface ?SerialBaud Rate Interface ?NetworkChanging Network Interface Parameters Dhcp Off IP Address Subnet Mask Gateway 000.000.000.000 ? OffPrinting a Network Interface Status Changing the Emulation Print Kpdl Errs Off EmulationAlt. Emulation ?PCL ?OffPen1 Width Dots Setting the Default FontPen Width KC-GL Page Set ? Spsz?I000 Font Select InternalI000 Courier RegularSize Points Setting the Character Pitch for Courier/Letter GothicSetting the character code set Pitch 10.00 cpiUsing Page Set Menus Source size indicator Target size indicator Zoom CS→CSSelecting the Reduced Print CS →C S98% Zoom→CS Orientation PortraitCR Action LF Action LF onlyCR Action CR only ? CR onlyEcoPrint Mode Off Setting the Print QualityKIR Mode Print QualityResolution ? Fast Mode EcoPrint ModeResolution Fast 1200 mode Operating an Option Hard DiskRead Data Hard DiskRead Data DataH001 Write DataDelete Data DataH001 List PartitionsList Partitions ? Delete DataOperating the RAM Disk Read Data ? DataH001 Operating a Memory Card Read Fonts ? Memory CardRead Fonts Read Fonts ProcessingFormatting Format Paper Handling MP Tray Type ? Plain Setting the MP Tray TypeMP Tray Type Plain Cassette Paper Size DisplayUnit ? mm Cassette1 sizeUnit Cassette 1 Type PlainCassette 1 Type ? Plain Feed Select ? Cassette1Feed Select Cassette1 Stack Select Top tray FaceDn Duplex Mode NoneDuplex Mode ?None Stack Select ?Top tray FaceDnA4/Letter 000 Stitch AdjustType Adjust Custom Override A4/LT OffPaper Weight ? Normal Type Adjust ? CustomPaper Weight Normal Duplex Path EnableOther Modes MSG Language ? English OthersMSG Language English Form Feed Time Out 030secSleep timer 015 min Sleep timerSleep timer 01 5 min Sleep ModeSelf test Please wait Ready Printer ResetPrinter Reset ? Resource Prot OffAuto Continue Mode On Auto Continue Mode OffAuto Continue Mode ? Off BuzzerDuplex Auto Continue Timer 0SecFinishing Error Duplex ? OffStaple ? Off ServiceStaple PunchPress Key repeatedly until Print Troubleshooting Symptom Check Items Corrective ActionGeneral Guide Print Quality Problems Check the print density Check the EcoPrint settingCheck the charger unit installation Check the paper rampMaintenance Messages Indicators and MessagesIndicators Indicator Condition DescriptionPlease reinstall Adapter Duplex disabledPath error Incorrect slot Install MKError Messages Correct reading of the memory card Description Reference Correcting a Paper JamPaper jam message Online help messagesJam in Paper Cassette Jam at the MP TrayJam inside the MP transport Push the lever gray colored to raise the duplex unit Jam in Left Cover Paper Jam at the Option Document Finisher Chapter Toner Container ReplacementToner Container Replacement Interval Replenishing TonerMaintenance Pull it several times, and then push it back Replacing of toner and cleaning of the internal parts Fonts PCL Scalable and Bitmap Fonts Kpdl Fonts Fonts Appendix a Available OptionsIB-20/21E/22 Network Interface Card PF-70 Paper FeederPF-75 Paper Feeder IB-20/IB-21E/IB-22 Network Interface CardsNetwork Interface Installing Option UnitsPF-70/75 Paper Feeders DF-71/73/75 Document FinishersHard Disk Memory CardYES no Removing the Main Circuit BoardRemoving the Main Circuit Board from the Printer Removing Dimm Installing DIMMsTesting the Expansion Memory DIMMs to be usedParallel Interface Interface SignalsAppendix B Host Computer Interface Parallel Interface Communication ModesSpecifications USB InterfaceSerial Interface Option RS-232C ProtocolRS-232C Interface RS-232C Cable Connection Prescribe Frpo D0 commandConnecting the Printer to the Computer Obtain a Suitable RS-232C CableSystem Setting the RS-232C ParametersWindows XP, proceed as follows Windows 95/98/MEDOS \MODE COM196,N,8,1,P C\MODE LPT1=COM1Appendix C Specifications Specifications Description FS-9120DN FS-9520DNAppendix C Specifications Description FS-9120DN FS-9520DNGlossary RAM disk Sleep modePrinter driver Simple Network Management Protocol SnmpIndex Dimm A-5Index

WP36/50 specifications

The HP WP36/50 is an innovative calculator designed specifically for advanced users, particularly in the fields of engineering, mathematics, and financial analysis. This powerful tool offers a blend of functionality and efficiency, making it an indispensable device for professionals and students alike.

One of the standout features of the HP WP36/50 is its extensive set of mathematical functions. With support for various advanced calculations, including calculus, linear algebra, and complex number computations, users can perform intricate mathematical operations with ease. The calculator is equipped with Algebraic and RPN (Reverse Polish Notation) input modes, catering to different user preferences and enhancing usability.

The display of the HP WP36/50 is another significant feature. It boasts a high-resolution LCD that provides clear visibility of complex equations and graphs. This is particularly beneficial for users who rely on visual representations of data to analyze information effectively. The calculator also supports multi-line input, allowing users to view and edit equations easily, thereby improving workflow efficiency.

In terms of memory, the HP WP36/50 offers ample storage capacity for variables, functions, and data sets. This capability is essential for users who need to retain and access a significant amount of information without the hassle of re-entering data repeatedly. The calculator also supports programmable features, enabling users to create custom functions and automate repetitive calculations, which further enhances productivity.

The HP WP36/50 incorporates advanced connectivity options, including USB and Bluetooth compatibility, allowing it to connect with other devices for data transfer. This feature is particularly advantageous for users who need to share results or collaborate with peers. Additionally, the calculator supports various file formats, making it easier to export data for presentations or further analysis.

Battery life and durability are also noteworthy characteristics of the HP WP36/50. Designed for extensive use, it features a long-lasting battery that ensures reliable performance during prolonged calculations. The robust build quality of the calculator emphasizes its suitability for daily use, even in rigorous environments.

Overall, the HP WP36/50 combines sophisticated technology with user-friendly design, making it an excellent choice for anyone requiring a high-performance calculator. Its features, such as advanced mathematical capabilities, multi-line display, extensive memory, and connectivity options, distinguish it as a top-tier device in the world of scientific calculators.
Top Page Image Contents