3.Touch 
or 
to scroll through the thumbnails of your photos.
4.When the thumbnail of the photo you want to edit appears, touch it.
5.When the selected photo appears by itself on the display, touch the image or touch Options.
The Options menu appears.
6.Touch Edit.
The Edit menu appears.
7.Touch Color Effect.
NOTE: If the menu option you want is not visible on the screen, touch 
or
to scroll through all the menu options. The Color Effect menu appears.
8.Touch one of the color effect options:
Photos
No Effect
Black & White
Sepia
Antique
Does not apply any special color effects to your photo.
Prints the photo in black and white.
Applies brown tones, similar to photos produced in the early 1900s, to your photo.
Applies brown tones along with some pale colors to your photo. With this option, your photo will look like it was
The selected color effect is applied to the photo, and the photo is shown by itself on the display.
To preview your edited photo
▲Touch the Back icon until you return to the Options menu, then touch Print Preview.
To print your edited photo
▲Touch the Back icon until you return to the View Photos screen, then touch Print.
Remove red-eye
The flash on a camera (especially on older model cameras) can sometimes cause a subject's eyes to appear red in your photos. You can remove redness so that eyes appear the correct shade in your photos.
To remove red-eye from photos
1.Insert a memory card into the appropriate slot on the HP Photosmart, or connect a storage device to the front USB port.
The Photosmart Express menu appears, with the most recent photo shown on the display.
2.Touch View.
The View Photos screen appears.
3.Touch 
or 
to scroll through the thumbnails of your photos.
Edit photos using the control panel | 81 |